307.451 Maschinenelemente Machine Design
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2017W, VO, 3.0h, 4.0EC
TUWEL

Properties

  • Semester hours: 3.0
  • Credits: 4.0
  • Type: VO Lecture

Aim of course

Knowledge about correct design and calculation of different machine elements. Theoretical background of different design and calculation methods.

Subject of course

Correct design and calculation of the following machine - and design-elements: Journal bearings and HD-theory, radial and axial-bearings, antifriction bearings-Hertzian pressure, theory of ball- and roller bearings, materials and strength, design and mounting of bearings, shafts and crank-shafts-calculation and design, critical speed and torsional vibrations, hubs, keys, clutches, seals, lubrication, gears.

Additional information

Lectures will be held in the Radinger lecture hall (building BD, first floor). As we expect at the beginning more than 250 listeners for oktober and november a livestream broadcast can be viewed in further rooms. See news and "Course dates".

Start of the lectures: Monday, October 9th, 2017

Application for examination solely via TISS. Examination of this course is written (duration 3,5 hours) and oral. When written tests results in clear grade an oral will be held if the knowledge questions were answered insufficiently. Oral examination will be held approximately two weeks after written test; exact date will be fixed at the beginning of the written test. Electronic handheld calculators for the test are available from the institute at the beginning of the test. Programmable calculators are not allowed for the test. For the test a non-programmable handheld calculator, pencils, rulers compass with extension and a passport are needed. 
At the moment many places for the tests are requested. Therefore we have extended the number of participants to the maximum we can handle There please deregistrate in TISS as soon as you have decided not to participate in a test after application.

Written test is held from 8.30 Uhr till appr. 12.30 Uhr in Radinger lecture room
Results of the written test are published on our homepage(see "Aktuelles - Prüfungsergebnisse").

 

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Wed10:00 - 11:3004.10.2017 - 18.10.2017Seminarraum BA 05 MEL Weigand
Wed10:00 - 11:3004.10.2017 - 18.10.2017GM 7 Kleiner Schiffbau 307451 VO Maschinenelemente
Wed10:00 - 11:3004.10.2017 - 24.01.2018GM 2 Radinger Hörsaal - TCH MEL Weigand
Wed10:00 - 11:3004.10.2017GM 3 Vortmann Hörsaal - VT VO Machine Design
Wed10:00 - 11:3004.10.2017Seminarraum BD 02C 307451 VO Maschinenelemente
Mon10:00 - 11:3009.10.2017 - 23.10.2017Seminarraum BD 03 VO Maschinenelemente Livestream
Mon10:00 - 11:3009.10.2017 - 22.01.2018GM 2 Radinger Hörsaal - TCH MEL Weigand
Mon10:00 - 11:3009.10.2017GM 4 Knoller Hörsaal - VT 307451 VO Maschinenelemente
Wed10:00 - 11:3011.10.2017 - 18.10.2017Seminarraum BD 03 VO Maschinenelemente Livestream
Wed10:00 - 11:3011.10.2017Seminarraum BD 02C MEL VO Weigand
Mon10:00 - 11:3016.10.2017Seminarraum BD 02C 307451 VO Maschinenelemente Livestream
Mon10:00 - 11:3016.10.2017Seminarraum Lehar 01 Vorlesung Maschinenelemente Livestream
Mon10:00 - 11:3016.10.2017Seminarraum BA 10B 307.451 VO Machine Design Livestream
Wed10:00 - 11:3018.10.2017Seminarraum BD 02C MEL VO Weigand
Wed10:00 - 11:3025.10.2017Seminarraum BA 02B MEL VO Weigand
Mon10:00 - 11:3030.10.2017Seminarraum BD 03 Lecture Machine Design Livestream
Wed10:00 - 11:3001.11.2017Seminarraum BA 02B MEL VO Weigand
Mon10:00 - 11:3006.11.2017Seminarraum BD 03 307451 VO Maschinenelemente
Mon10:00 - 11:3006.11.2017GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums Lecture Machine Design Livestream
Wed10:00 - 11:3008.11.2017Seminarraum BA 02B Lecture Machine Design Livestream
Wed10:00 - 11:3008.11.2017Seminarraum BD 03 Lecture Machine Design Livestream
Mon10:00 - 11:3013.11.2017 - 20.11.2017Seminarraum BD 03 307451 VO Maschinenelemente
Wed10:00 - 11:3022.11.2017Seminarraum BD 02C Vorlesung Maschinenelemente Livestream
Wed10:00 - 11:3022.11.2017Seminarraum BD 03 Lecture Machine Design Livestream
Wed12:00 - 16:0020.06.2018Seminarraum BD 03 Komm. Prüfungen Maschinenelemente
Maschinenelemente Machine Design - Single appointments
DayDateTimeLocationDescription
Wed04.10.201710:00 - 11:30Seminarraum BA 05 MEL Weigand
Wed04.10.201710:00 - 11:30Seminarraum BD 02C 307451 VO Maschinenelemente
Wed04.10.201710:00 - 11:30GM 3 Vortmann Hörsaal - VT VO Machine Design
Wed04.10.201710:00 - 11:30GM 2 Radinger Hörsaal - TCH MEL Weigand
Wed04.10.201710:00 - 11:30GM 7 Kleiner Schiffbau 307451 VO Maschinenelemente
Mon09.10.201710:00 - 11:30Seminarraum BD 03 VO Maschinenelemente Livestream
Mon09.10.201710:00 - 11:30GM 4 Knoller Hörsaal - VT 307451 VO Maschinenelemente
Mon09.10.201710:00 - 11:30GM 2 Radinger Hörsaal - TCH MEL Weigand
Wed11.10.201710:00 - 11:30Seminarraum BA 05 MEL Weigand
Wed11.10.201710:00 - 11:30Seminarraum BD 02C MEL VO Weigand
Wed11.10.201710:00 - 11:30Seminarraum BD 03 VO Maschinenelemente Livestream
Wed11.10.201710:00 - 11:30GM 2 Radinger Hörsaal - TCH MEL Weigand
Wed11.10.201710:00 - 11:30GM 7 Kleiner Schiffbau 307451 VO Maschinenelemente
Mon16.10.201710:00 - 11:30Seminarraum BA 10B 307.451 VO Machine Design Livestream
Mon16.10.201710:00 - 11:30Seminarraum BD 02C 307451 VO Maschinenelemente Livestream
Mon16.10.201710:00 - 11:30Seminarraum Lehar 01 Vorlesung Maschinenelemente Livestream
Mon16.10.201710:00 - 11:30GM 2 Radinger Hörsaal - TCH MEL Weigand
Mon16.10.201710:00 - 11:30Seminarraum BD 03 VO Maschinenelemente Livestream
Wed18.10.201710:00 - 11:30Seminarraum BA 05 MEL Weigand
Wed18.10.201710:00 - 11:30Seminarraum BD 02C MEL VO Weigand

Examination modalities

Written and oral examination mit design tasks, artihmetic problems and small freehand sketches

Course registration

Begin End Deregistration end
03.09.2017 12:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management 3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

Lecture notes for this course: Maschinenelemente - Skriptum zu den Vorlesungen Maschinenelemente 7. Auflage 2016 (available October 9th, 2017) - Niemann-Winter-Höhn: Maschinenelemente - Steinhilper-Röper: Maschinen-u. Konstruktionselemente Bd. 1-3, - Lecture notes of the course "Grundlagen der Konstruktionslehre" (LVA: 307.428) of Prof. Kartnig

 

Previous knowledge

An overview of all lectures about mechanical engineering can be obtained at http://www.ikl.tuwien.ac.at/mel

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German