307.492 Machine Elements 3
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2021W, VO, 3.0h, 3.0EC
Lecture TubeTUWEL

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: VO Lecture
  • LectureTube course
  • Format: Distance Learning

Learning outcomes

After successful completion of the course, students are able to:

  • design planetary and bevel gear independently
  • explain the mode of operation of worm, cycloid gear and freewheels
  • calculate gear micro-geometries independently
  • understand the occurrence of gear damage and assess its consequences
  • master in-depth calculation tasks of machine construction
  • implementing machine designs with 3D CAD systems in a methodically sensible manner as well as using computer-aided design and verification methods
  • use common machine element calculation programs
  • describe the most important cost parameters using the example of gearbox construction
  • understand motion sequences and the resulting forces in gearboxes or multi-body simulation systems

Subject of course

  • freewheels
  • bevel gear cogs and gear
  • planetary gear
  • worm gear
  • high-ratio gear (Harmonic Drive, cycloid gear)
  • damage to teeth, fretting, grey spots
  • micro geometry of gears
  • construction methodology: costs
  • computer-aided design of transmissions
  • multibody system dynamic investigation of transmissions
  • computer-aided construction

Teaching methods

Lecture on the theoretical basics and basic calculations of the content mentioned above

  • practice and apply the content using examples
  • performance assessment through written and/or oral examination (VO)
  • creation of an independent construction with CAD
  • examination-based performance assessment (UE)

Mode of examination

Oral

Additional information

Start: Friday, Octorber 08, 2021 hybrid (HS GM4 in presence, in parallel Livestream as well as recording 08.15h bis 09.45h)

See TUWEL for Links to the sessions.

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Fri08:00 - 10:0008.10.2021 - 28.01.2022GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed08:00 - 10:0013.10.2021 - 26.01.2022GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Machine Elements 3 - Single appointments
DayDateTimeLocationDescription
Fri08.10.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed13.10.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri15.10.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri22.10.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed27.10.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri29.10.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed03.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri05.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed10.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri12.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed17.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri19.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed24.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri26.11.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed01.12.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri03.12.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri10.12.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed15.12.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri17.12.202108:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed12.01.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492

Examination modalities

Oral examination

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri10:00 - 13:0011.02.2022 Exam will be held via zoomoral10.01.2022 11:00 - 06.02.2022 23:00TISS307.492 VO Maschinenelemente 3 Prüfung
Fri10:00 - 13:0004.03.2022 Exam will be held via zoomoral10.01.2022 11:00 - 06.02.2022 23:00TISS307.492 VO Maschinenelemente 3 Prüfung

Course registration

Not necessary

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase
066 445 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
066 482 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase

Literature

No lecture notes are available.

Previous knowledge

Basis are the lectures machine design 1 and 2

Preceding courses

Accompanying courses

Continuative courses

Language

German