307.452 Maschinenelemente Engineering Design Training
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2020S, UE, 3.0h, 3.0EC

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: UE Exercise

Learning outcomes

After successful completion of the course, students are able to...

- calculate and design selected machine elements according to standards and design guidelines

- perform design tasks on their own

- to recognize and evaluate pros and cons of machine elements under the relevant aspects of operation and design

Subject of course

Design practical acc. the lecture Machine Elements.

Teaching methods

Own Realisation of a complete design task with CAD by the students

Mode of examination

Immanent

Additional information

Please unsubscribe from this course if you cannot attend it so that the vacant spots can be reassigned. Thank you!

Only one registration per year and group is possible.

Opening times of the Vienna University of Technology: Monday to Saturday from 06:00 to 23:00. All entrances are closed on Sundays and public holidays.

The occupancy plans of the CAD rooms hang on the entrance doors of the computer rooms.

The preliminary discussions always take place on the first day of the exercise. The place and time of the preliminary meetings will be announced separately (E-Mail).

IMPORTANT! The group sizes are fixed, the waiting lists cannot be adopted! If you are only on the waiting list, please register in another group. Since it is also possible to unsubscribe via the system, free spaces can always arise.

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Mon08:00 - 17:0002.03.2020 - 09.03.2020CAD-Labor Saal 1 und 2 KÜ MEL
Mon08:00 - 17:0002.03.2020 - 09.03.2020Zeichensaal CAD 2 KÜ MEL
Mon13:30 - 15:0002.03.2020CAD-Labor Saal 3 KÜ Mel
Tue08:00 - 15:0003.03.2020 - 10.03.2020Zeichensaal CAD 2 KÜ MEL
Tue08:00 - 15:0003.03.2020 - 10.03.2020CAD-Labor Saal 1 und 2 KÜ MEL
Wed08:00 - 12:0004.03.2020CAD-Labor Saal 1 und 2 KÜ MEL
Wed08:00 - 12:0004.03.2020Zeichensaal CAD 2 KÜ MEL
Thu08:00 - 12:0005.03.2020 - 12.03.2020CAD-Labor Saal 1 und 2 KÜ MEL
Thu08:00 - 12:0005.03.2020 - 12.03.2020Zeichensaal CAD 2 KÜ MEL
Fri08:00 - 12:0006.03.2020 - 13.03.2020CAD-Labor Saal 1 und 2 KÜ MEL
Fri08:00 - 14:0006.03.2020 - 13.03.2020Zeichensaal CAD 2 KÜ MEL
Fri08:00 - 14:0006.03.2020 - 13.03.2020CAD-Labor Saal 3 KÜ Mel
Mon08:30 - 12:3009.03.2020CAD-Labor Saal 1 und 2 CATIA
Tue08:30 - 12:3010.03.2020CAD-Labor Saal 1 und 2 CATIA
Maschinenelemente Engineering Design Training - Single appointments
DayDateTimeLocationDescription
Mon02.03.202008:00 - 17:00Zeichensaal CAD 2 KÜ MEL
Mon02.03.202008:00 - 17:00CAD-Labor Saal 1 und 2 KÜ MEL
Mon02.03.202013:30 - 15:00CAD-Labor Saal 3 KÜ Mel
Tue03.03.202008:00 - 15:00Zeichensaal CAD 2 KÜ MEL
Tue03.03.202008:00 - 15:00CAD-Labor Saal 1 und 2 KÜ MEL
Wed04.03.202008:00 - 12:00Zeichensaal CAD 2 KÜ MEL
Wed04.03.202008:00 - 12:00CAD-Labor Saal 1 und 2 KÜ MEL
Thu05.03.202008:00 - 12:00Zeichensaal CAD 2 KÜ MEL
Thu05.03.202008:00 - 12:00CAD-Labor Saal 1 und 2 KÜ MEL
Fri06.03.202008:00 - 12:00CAD-Labor Saal 1 und 2 KÜ MEL
Fri06.03.202008:00 - 14:00Zeichensaal CAD 2 KÜ MEL
Fri06.03.202008:00 - 14:00CAD-Labor Saal 3 KÜ Mel
Mon09.03.202008:00 - 17:00Zeichensaal CAD 2 KÜ MEL
Mon09.03.202008:00 - 17:00CAD-Labor Saal 1 und 2 KÜ MEL
Mon09.03.202008:30 - 12:30CAD-Labor Saal 1 und 2 CATIA
Tue10.03.202008:00 - 15:00Zeichensaal CAD 2 KÜ MEL
Tue10.03.202008:00 - 15:00CAD-Labor Saal 1 und 2 KÜ MEL
Tue10.03.202008:30 - 12:30CAD-Labor Saal 1 und 2 CATIA
Thu12.03.202008:00 - 12:00Zeichensaal CAD 2 KÜ MEL
Thu12.03.202008:00 - 12:00CAD-Labor Saal 1 und 2 KÜ MEL

Examination modalities

Assessment of the calculation and drawings created during the course, taking into account also the  workers participation during the course.

Course registration

Begin End Deregistration end
06.03.2020 08:00

Precondition

The student must have at least 4 of the course(s) completed listed below:

Group Registration

GroupRegistration FromTo
4: 2.3. - 1.4.2020 A07.01.2020 08:0024.02.2020 08:00
4: 2.3. - 1.4.2020 B07.01.2020 08:0024.02.2020 08:00
4: 2.3. - 1.4.2020 C07.01.2020 08:0024.02.2020 08:00
5: 4.5. - 10.6.2020 A07.01.2020 08:0027.04.2020 08:00
5: 4.5. - 10.6.2020 B07.01.2020 08:0027.04.2020 08:00
5: 4.5. - 10.6.2020 C07.01.2020 08:0027.04.2020 08:00
6: [ONLINE] 7.9.- 7.10.2020 A07.01.2020 08:0001.09.2020 08:00
6: [ONLINE] 7.9.- 7.10.2020 B07.01.2020 08:0001.09.2020 08:00
6: [ONLINE] 7.9.- 7.10.2020 C07.01.2020 08:0001.09.2020 08:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management 4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

No lecture notes are available.

Previous knowledge

See above:

Basics of Technical Drawing / CAD and Fundamentals of Engineering Design and Mechanics

We recommend before application to UE Maschinenelemente Engineering Design Training to successfully complete the prerequisite courses.

 

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German