307.452 Maschinenelemente Engineering Design Training
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2024W, UE, 3.0h, 3.0EC

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: UE Exercise
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to...

- calculate and design selected machine elements according to standards and design guidelines

- perform design tasks by thier own

- to recognize and evaluate pros and cons of machine elements under the relevant aspects of operation and design

Subject of course

Design practical acc. the lecture Machine Elements.

Teaching methods

Own Realisation of a complete design task with CAD by the students

Mode of examination

Immanent

Additional information

Please note the admission requirements!

Students of these courses may register for block 1, 2 and 3 (TISS) from Wed. 11.9.2024, 8.00 am

Opening hours of the TU Vienna: Mon.-Sat. from 6.00 am to 11.00 pm. On Sundays and holidays all entrances remain closed.

If you are not able to attend the course, please cancel your registration, so that the places that become free can be reallocated. Thank you!
Only one registration per year and group is allowed.
Preliminary meetings always take place on the first day of the KU. Place and time of the preliminary meetings will be announced separately (TUWEL).
IMPORTANT. The group sizes are fixed, the waiting lists cannot be taken over! If you are only on the waiting list, please register in another group. Since it is also possible to deregister via the system, there can always be free places.

Translated with www.DeepL.com/Translator (free version)

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Tue08:00 - 12:0008.10.2024 - 05.11.2024CAD-Labor Saal 1 und 2 MEL KÜ
Wed08:00 - 14:0009.10.2024 - 06.11.2024CAD-Labor Saal 1 und 2 MEL KÜ
Thu08:00 - 14:0010.10.2024 - 17.10.2024CAD-Labor Saal 1 und 2 MEL KÜ
Fri08:00 - 13:0011.10.2024 - 25.10.2024CAD-Labor Saal 1 und 2 MEL KÜ
Mon08:00 - 14:0014.10.2024 - 11.11.2024CAD-Labor Saal 1 und 2 MEL KÜ
Thu08:00 - 14:0014.11.2024 - 16.01.2025CAD-Labor Saal 1 und 2 MEL KÜ
Mon08:00 - 14:0018.11.2024 - 27.01.2025CAD-Labor Saal 1 und 2 MEL KÜ
Tue08:00 - 12:0019.11.2024 - 21.01.2025CAD-Labor Saal 1 und 2 MEL KÜ
Wed08:00 - 14:0020.11.2024 - 22.01.2025CAD-Labor Saal 1 und 2 MEL KÜ
Fri08:00 - 13:0022.11.2024 - 17.01.2025CAD-Labor Saal 1 und 2 MEL KÜ
Maschinenelemente Engineering Design Training - Single appointments
DayDateTimeLocationDescription
Tue08.10.202408:00 - 12:00CAD-Labor Saal 1 und 2 MEL KÜ
Wed09.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Thu10.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Fri11.10.202408:00 - 13:00CAD-Labor Saal 1 und 2 MEL KÜ
Mon14.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Tue15.10.202408:00 - 12:00CAD-Labor Saal 1 und 2 MEL KÜ
Wed16.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Thu17.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Fri18.10.202408:00 - 13:00CAD-Labor Saal 1 und 2 MEL KÜ
Mon21.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Tue22.10.202408:00 - 12:00CAD-Labor Saal 1 und 2 MEL KÜ
Wed23.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Fri25.10.202408:00 - 13:00CAD-Labor Saal 1 und 2 MEL KÜ
Mon28.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Tue29.10.202408:00 - 12:00CAD-Labor Saal 1 und 2 MEL KÜ
Wed30.10.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Mon04.11.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Tue05.11.202408:00 - 12:00CAD-Labor Saal 1 und 2 MEL KÜ
Wed06.11.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ
Mon11.11.202408:00 - 14:00CAD-Labor Saal 1 und 2 MEL KÜ

Examination modalities

Assessment of the calculation and drawings created during the course, taking into account also the  workers participation during the course.

Course registration

Begin End Deregistration end
02.09.2024 08:00

Precondition

The student must have at least 4 of the course(s) completed listed below:

Group Registration

GroupRegistration FromTo
1. 7.10.24 - 6.11.24 A11.09.2024 08:0030.09.2024 08:00
1. 7.10.24 - 6.11.24 B11.09.2024 08:0030.09.2024 08:00
1. 7.10.24 - 6.11.24 C11.09.2024 08:0030.09.2024 08:00
2. 11.11.24 - 11.12.24 A11.09.2024 08:0004.11.2024 08:00
2. 11.11.24 - 11.12.24 B11.09.2024 08:0004.11.2024 08:00
2. 11.11.24 - 11.12.24 C11.09.2024 08:0004.11.2024 08:00
3. 9.12.24 - 22.1.25 A11.09.2024 08:0002.12.2024 08:00
3. 9.12.24 - 22.1.25 B11.09.2024 08:0002.12.2024 08:00
3. 9.12.24 - 22.1.25 C11.09.2024 08:0002.12.2024 08:00

Curricula

Study CodeObligationSemesterPrecon.Info
033 245 Mechanical Engineering Mandatory4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management Mandatory4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

No lecture notes are available.

Previous knowledge

See above:

Basics of Technical Drawing / CAD and Fundamentals of Engineering Design and Mechanics

We recommend before application to UE Maschinenelemente Engineering Design Training to successfully complete the prerequisite courses.

 

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German