309.025 Mechanics of solid bodies for chemical engineers - exercises 1
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2023S, UE, 2.0h, 2.0EC
TUWEL

Properties

  • Semester hours: 2.0
  • Credits: 2.0
  • Type: UE Exercise
  • Format: Presence

Learning outcomes

After successful completion of the course, students are able to perform the following tasks for the solution of basic problems of statics and strength of materials and to combine them for the complete solution of the problems:

  • To identify given forces like those of springs, gliding friction, gravity, and also (other) distributed forces, and to formulate them mathematically for the solution of equilibrium problems;
  • To apply the conditions of equilibrium both graphically and arithmetically to find the constraining forces in a statically determined system;
  • To determine the stress resultants in beam-like structures as functions of a characteristic coordinate and to represent them graphically;
  • To determine in adhesion problems the limits of equilibrium with respect both to the onset of sliding and to tilting graphically as well as arithmetically and to find the necessary minimum coefficient of adhesion for equilibrium; moreover, to check systems for self-locking behaviour; furthermore, to find the forces in systems where bodies move with sliding friction (and constant velocity) both graphically and arithmetically;
  • To determine the center of gravity of bodies and plane areas by Guldin's rule and appropriate combination of sub-bodies/areas with already determined centers of gravity;
  • To determine the moments of inertia and products of inertia both for bodies and plane areas by application of Steiner's law;
  • To find the stresses and displacements in straight Euler-Bernoulli bars caused by tension/compression, bending, and torsion (of bars with circular cross section) both for statically determined and undetermined systems; to this aim, to apply  the principle of superposition, too.

Subject of course

t.b.a.

Teaching methods

Problems illustrating the above mentioned topics of mechanics have to be solved by the students (at Summer Semester 2022 in 'hybrid' mode; for details see the German version)

Mode of examination

Immanent

Additional information

A subscription for this course in TISS is obligatory!

The course in the classroom starts March 1st, 20223

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Wed12:00 - 13:0001.03.2023 FH HS1, parallel dazu Live Stream (über TUWEL-Kurs abgewickelt)Vorbesprechung gemeinsam mit VO
Tue10:00 - 12:0014.03.2023 - 20.06.2023GM 3 Vortmann Hörsaal - VT LVA
Tue10:00 - 12:0027.06.2023HS 7 Schütte-Lihotzky - ARCH Test
Wed10:00 - 12:0019.07.2023HS 7 Schütte-Lihotzky - ARCH Ersatztest
Mechanics of solid bodies for chemical engineers - exercises 1 - Single appointments
DayDateTimeLocationDescription
Wed01.03.202312:00 - 13:00 FH HS1, parallel dazu Live Stream (über TUWEL-Kurs abgewickelt)Vorbesprechung gemeinsam mit VO
Tue14.03.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue21.03.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue28.03.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue18.04.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue25.04.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue02.05.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue09.05.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue23.05.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue06.06.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue13.06.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue20.06.202310:00 - 12:00GM 3 Vortmann Hörsaal - VT LVA
Tue27.06.202310:00 - 12:00HS 7 Schütte-Lihotzky - ARCH Test
Wed19.07.202310:00 - 12:00HS 7 Schütte-Lihotzky - ARCH Ersatztest

Examination modalities

Online tests serve as a basis for the mark; for further details see the German version.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri14:00 - 16:0028.06.2024 Hörsaal wird über TUWEL bekanntgegebenwrittenno application-2. Test
Wed10:00 - 12:0024.07.2024 Hörsaal wird über TUWEL bekanntgegebenwrittenno application-Ersatztest

Course registration

Begin End Deregistration end
09.02.2023 09:00 22.03.2023 12:00 22.03.2023 12:00

Precondition

The student has to be enrolled for at least one of the studies listed below

Curricula

Study CodeObligationSemesterPrecon.Info
033 273 Chemical and Process Engineering Mandatory2. Semester
734 Apparatus, Plant and Process Engineering Mandatory3. Semester
735 Chemical Engineering Mandatory3. Semester

Literature

Lecture notes for this course are available.

Previous knowledge

Besuch der Vorlesung 325.052 Mechanik 1 für VT möglichst im selben Semester.

Accompanying courses

Language

German