307.495 Machine Design 2
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2019S, VO, 3.0h, 3.0EC

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: VO Lecture

Aim of course

Knowledge about correct design and calculation of different machine elements. Theoretical background of different design and calculation methods.

Subject of course

Correct design and calculation of the following machine- and design-elements: clutches, belt- and chain drives, gears and gearboxes including DIN3990 (Theorie and calculations).

Additional information

Lectures will be held in the Lecture room GM1 Audimax (building BA, ground floor).

Start of the lectures: Friday, March 1st, 2019.

Application for examination solely via TISS. Examination of this course is written and oral. When written tests results in clear grade an oral will be held if the knowledge questions were answered insufficiently. Oral examination will be held approximately two weeks after written test; exact date will be fixed at the beginning of the written test. Electronic handheld calculators for the test are available from the institute at the beginning of the test. Programmable calculators are not allowed for the test. For the test a non-programmable handheld calculator, pencils, rulers compass with extension and a passport are needed. 
At the moment many places for the tests are requested. Therefore we have extended the number of participants to the maximum we can handle There please deregistrate in TISS as soon as you have decided not to participate in a test after application.

Written test is held from 10.45 h till 12.45 h in Radinger lecture room (GM2)

 

Lecturers

Contributors

Institute

Course dates

DayTimeDateLocationDescription
Tue11:00 - 13:0005.03.2019 - 25.06.2019GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri08:00 - 10:0008.03.2019 - 28.06.2019GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Machine Design 2 - Single appointments
DayDateTimeLocationDescription
Tue05.03.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri08.03.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue12.03.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri15.03.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue19.03.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri22.03.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue26.03.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri29.03.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue02.04.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri05.04.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue09.04.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri12.04.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue30.04.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri03.05.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue07.05.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri10.05.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue14.05.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri17.05.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Tue21.05.201911:00 - 13:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2
Fri24.05.201908:00 - 10:00GM 1 Audi. Max.- ARCH-INF VO Maschinenelemente 2

Examination modalities

Written and oral examination mit design tasks, artihmetic problems and small freehand sketches

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Wed - 23.09.2020written01.09.2020 08:00 - 15.09.2020 08:00TISS[ONLINE] Prüfung
Thu - 24.09.2020written01.09.2020 08:00 - 15.09.2020 08:00TISS[ONLINE] Prüfung
Thu10:30 - 13:0012.11.2020CAD-Labor Saal 3 written21.10.2020 08:00 - 11.11.2020 23:45TISSonline Prüf.MEL Prof.Weigand s
Thu10:30 - 13:0012.11.2020 distant learningwritten21.10.2020 08:00 - 11.11.2020 23:45TISSonline Prüf.MEL Prof.Weigand s
Thu10:30 - 13:0021.01.2021CAD-Labor Saal 3 written10.01.2021 08:00 - 20.01.2021 23:45TISSonline Prüf.MEL Prof.Weigand s
Thu10:30 - 13:0021.01.2021 distant learningwritten10.01.2021 08:00 - 20.01.2021 23:45TISSonline Prüf.MEL Prof.Weigand s
Fri10:30 - 13:0026.02.2021 distant learningwritten17.02.2021 08:00 - 25.02.2021 23:45TISSonline Prüf.MEL Prof.Weigand s
Fri10:30 - 13:0026.02.2021CAD-Labor Saal 3 written17.02.2021 08:00 - 25.02.2021 23:45TISSonline Prüf.MEL Prof.Weigand s
Tue08:00 - 15:0023.03.2021GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Wed10:30 - 13:0007.04.2021GM 2 Radinger Hörsaal - TCH written24.03.2021 08:00 - 06.04.2021 23:45TISSPrüf.MEL Prof.Weigand s
Tue08:00 - 15:0027.04.2021GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Tue10:30 - 13:0025.05.2021GM 2 Radinger Hörsaal - TCH written28.04.2021 08:00 - 24.05.2021 23:45TISSPrüf.MEL Prof.Weigand s
Tue08:00 - 15:0029.06.2021GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Thu10:30 - 13:0023.09.2021GM 1 Audi. Max.- ARCH-INF written01.09.2021 08:00 - 22.09.2021 23:45TISSPrüf.MEL Prof.Weigand s
Thu10:30 - 13:0023.09.2021GM 2 Radinger Hörsaal - TCH written01.09.2021 08:00 - 22.09.2021 23:45TISSPrüf.MEL Prof.Weigand s
Tue - 19.10.2021oralno application-Prüf.MEL Prof.Weigand m
Mon - 15.11.2021written20.10.2021 08:00 - 14.11.2021 23:45TISSPrüf.MEL Prof.Weigand s
Tue - 07.12.2021oralno application-Prüf.MEL Prof.Weigand m

Course registration

Begin End Deregistration end
01.10.2018 00:00

Registration modalities:

It ist not necessary to enroll into the course itself. However an enrollment is mandatory if you want to participate in the TUWEL-lectures

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management 4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

No lecture notes are available.

Previous knowledge

An overview of all lectures about machine design can be found at http://www.ikl.tuwien.ac.at/mel

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German