307.494 Machine Design 1
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2019W, VO, 3.0h, 3.0EC

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: VO Lecture

Learning outcomes

After successful completion of the course, students are able to...

- calculate and design selected machine elements according to standards and design guidelines

- perform design tasks by thier own

- to recognize and evaluate pros and cons of machine elements under the relevant aspects of operation and design

Subject of course

Correct design and calculation of the following machine - and design-elements: Journal bearings and HD-theory, radial and axial-bearings, antifriction bearings-Hertzian pressure, theory of ball- and roller bearings, materials and strength, design and mounting of bearings, shafts calculation and design, critical speed and torsional vibrations, hubs, keys, seals, lubrication.

Teaching methods

- Lectures about basics and design/calculation tools for the listed content

- Practice and application of the content with examples of machine elements, with guidance by the lecturer.

Mode of examination

Written and oral

Additional information

Lectures will be held in the Lecture room GM1 Audimax (building BA, ground floor).

Start of the lectures: Tuesday, October 1st, 2019, 4 pm

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Thu12:00 - 14:0003.10.2019 - 30.01.2020GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue16:00 - 18:0008.10.2019 - 28.01.2020GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Machine Design 1 - Single appointments
DayDateTimeLocationDescription
Thu03.10.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue08.10.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu10.10.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue15.10.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu17.10.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue22.10.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu24.10.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue29.10.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu31.10.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue05.11.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu07.11.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue12.11.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu14.11.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue19.11.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu21.11.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue26.11.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu28.11.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue03.12.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Thu05.12.201912:00 - 14:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO
Tue10.12.201916:00 - 18:00GM 1 Audi. Max. 307.494 Machine Elements 1 VO

Examination modalities

Exam only offered in German.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Mon08:00 - 10:0009.12.2019Kleiner Schiffbau oralno application-Prüf.MEL Prof.Weigand m
Tue08:00 - 15:0010.12.2019GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Fri08:00 - 12:0013.12.2019Seminarraum BD 03 oralno application-Prüf.MEL Prof.Weigand m
Thu14:00 - 16:3023.01.2020GM 2 Radinger Hörsaal written11.12.2019 08:00 - 22.01.2020 23:45TISSPrüf.MEL Prof.Weigand s
Tue08:00 - 15:0018.02.2020GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Thu08:30 - 10:3027.02.2020GM 2 Radinger Hörsaal written19.02.2020 08:00 - 25.02.2020 08:00TISSPrüf.MEL Prof.Weigand s
Tue08:00 - 15:0024.03.2020GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Wed08:30 - 10:3015.04.2020GM 2 Radinger Hörsaal written25.03.2020 08:00 - 14.04.2020 23:45TISSPrüf.MEL Prof.Weigand s
Tue08:00 - 15:0012.05.2020GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Tue08:30 - 10:3002.06.2020GM 2 Radinger Hörsaal written13.05.2020 08:00 - 01.06.2020 23:45TISSPrüf.MEL Prof.Weigand s
Tue08:00 - 15:0030.06.2020GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf.MEL Prof.Weigand m
Thu08:30 - 10:3024.09.2020GM 2 Radinger Hörsaal written31.08.2020 08:00 - 17.09.2020 08:00TISSPrüf.MEL Prof.Weigand s
Tue - 20.10.2020oralno application-Prüf.MEL Prof.Weigand m
Thu - 12.11.2020written21.10.2020 08:00 - 11.11.2020 23:45TISSPrüf.MEL Prof.Weigand s
Wed - 09.12.2020oralno application-Prüf.MEL Prof.Weigand m

Course registration

Begin End Deregistration end
07.10.2019 00:00

Registration modalities:

It ist not necessary to enroll into the course itself. However an enrollment is mandatory if you want to participate in the TUWEL-lectures

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management 3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

Lecture notes for the courses machine design - "7. Auflage 2016" is available October 4th, 2018 10.30h - 12.00h at the  institute  (BD, 3.OG, sekretariate) as well afterwards in the sekretariate during normal office hours - Niemann-Winter-Höhn: Maschinenelemente - Steinhilper-Röper: Maschinen-u. Konstruktionselemente Bd. 1-3, - Lecture notes of the course "Grundlagen der Konstruktionslehre" (LVA: 307.428) of Prof. Kartnig

Previous knowledge

An overview of all lectures about machine design can be found at http://www.ikl.tuwien.ac.at/mel

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German