066 482 Master programme Mechanical Engineering - Management

  • Show all courses of the academic year of which the selected semester is part of.

2024W-2025S (2017U)

TitlePrecon.HoursECTS
Master programme Mechanical Engineering - Management https://www.tuwien.at/studium/studienangebot/masterstudien/wirtschaftsingenieurwesen-maschinenbau/
120.0
Prüfungsfach Vertiefende Grundlagen
30.0
Modulgruppe Aufbaumodule
Module Computational Fluid Dynamics für Strömungsmaschinen
5.0
VO Computational Fluid Dynamics für Strömungsmaschinen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Computational Fluid Dynamics für Strömungsmaschinen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
Modul Controlling, Projekt- und Prozessmanagement
5.0
VU Controlling
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Project and Process Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
Modul Elektrotechnik und Elektronik 2
5.0
VO Vertiefung Elektrotechnik und Elektronik für MB und WIMB
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
VO Elektrische Antriebstechnik für MB und WIMB
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
UE Elektrotechnik und Elektronik für MB und WIMB
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.0
Modul Festkörperkontinuumsmechanik
5.0
VO Festkörperkontinuumsmechanik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Festkörperkontinuumsmechanik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Finite Elemente Methoden für WIMB
5.0
VO Fundamentals of Finite Element Methods
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Finite Elemente in der Anwendung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Höhere Festigkeitslehre
5.0
VU Strength of Materials
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
Modul Höhere Maschinenelemente
5.0
VO Maschinenelemente 3
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
307.492 VO 2024W
3.03.0
UE Maschinenelemente 3
???steg_ok???
Courses require the completion of the introductory and orientation phase
Es gelten verpflichtende Vorraussetzungen laut Verordnungstext.
2.02.0
307.493 UE 2025S
2.02.0
Modul Human Resource Management and Leadership
5.0
VO Human Resource Management and Leadership
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Human Resource Management and Leadership
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Industrielle Informationssysteme
5.0
VO Industrial Information Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Industrial Information Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Maschinendynamik
5.0
VO Maschinendynamik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Machine Dynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Mechanik 3
5.0
VO Mechanics 3
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
UE Mechanics 3
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Mehrkörpersysteme
5.0
VO Introduction to Multi-Body-System Dynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Introduction to Multi-Body-System Dynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Numerische Methoden der Ingenieurwissenschaften
5.0
VO Numerical Methods in Engineering 1
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.5
VO Numerical Methods in Engineering 2
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.5
Modul Numerische Methoden der Strömungs- und Wärmetechnik
5.0
VU Fundamentals of numerical thermo-fluid dynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
4.05.0
Modul Oberflächentechnik
5.0
VO Oberflächentechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
LU Oberflächentechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Simulationstechnik
5.0
VU Continous Simulation
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
Modul Strömungsmechanik 2
5.0
VU Strömungsmechanik 2
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
322.090 VU 2024W
4.05.0
Modul Thermodynamik 2
5.0
VO Thermodynamics in Power Engineering
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Thermodynamics in Power Engineering
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
Modul Thermodynamik für WIMB 2
5.0
VU Applied Thermodynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
302.696 VU 2025S
4.05.0
Modul Virtuelle Produktentwicklung
5.0
VO Virtual Product Development
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Virtual Product Development
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Wärmeübertragung
5.0
VU Heat Transfer
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.05.0
322.046 VU 2024W
3.05.0
Modul Werkstofftechnologie
5.0
VO Materials Science of Steels
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
VO Engineering Materials
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
LU Materials Testing 2
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.0
Prüfungsfach Vertiefung und Projektarbeit
33.0
Modulgruppe Weitere Module
Modul Projektarbeit
5.0
PR Project Work
4.05.0
4.05.0
4.05.0
4.05.0
302.706 PR 2025S
4.05.0
302.706 PR 2024W
4.05.0
4.05.0
4.05.0
4.05.0
4.05.0
4.05.0
4.05.0
4.05.0
4.05.0
322.069 PR 2025S
4.05.0
4.05.0
307.101 PR 2025S
4.05.0
Modulgruppe Vertiefungsmodule "Maschinenbau"
Modul Aerodynamik
14.0
VU Asymptotic Methods of Fluid Mechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VO Boundary Layer Theory
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
322.029 VO 2024W
2.03.0
VU Gas- und Aerodynamik
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.05.0
322.075 VU 2025S
3.05.0
SE Seminar of Biofluidmechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
322.060 SE 2025S
2.03.0
2.03.0
VO Dimensional Analysis
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
322.062 VO 2025S
2.03.0
Modul Apparate- und Anlagenbau
14.0
VU Grundlagen des Apparate- und Anlagenbaus
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
VO Pressure Vessel Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Pressure Vessel Technology - Design Work
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.04.0
VU Pressure Equipment - Modell and Admissiblity Analysis
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
Modul Automatisierungstechnik
14.0
VO Digital Control
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU State Space Control of MIMO Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Feedback Control
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.54.0
LU Laboratory Advanced Automatic Control
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Seminar Automatic Control
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Automobile, Energy and Environment
14.0
VO Hybridantriebe
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Automotive Exhaust Emissions
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
LU Fahrzeugantriebe - Abgas und Energie
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Motor Vehicle Noise Emissions
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
VO Katalytische Abgasreinigung an Verbrennungsmotoren
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
SE Automobile, Energy and Environment
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Biomechanik der Gewebe
14.0
VO Tissue Biomechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
317.026 VO 2025S
2.03.0
UE Tissue Biomechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Tissue Biomechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
317.028 SE 2025S
2.02.0
LU Tissue Biomechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Finite Element Methods in Biomechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
Modul Biomechanik des menschlichen Bewegungsapparates
14.0
VO Modelling of the Human Locomotor System
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Injury Mechanics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO The Motor 'Muscle'
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
LU The Motor 'Muscle'
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Biomechanics of the Human Locomotor System
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Composite Structures
14.0
VU Lightweight Design with Fiber-Reinforced-Polymers
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
UE Design of Composite Structures using Finite Element Methods
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Light Weight Structures
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Composites Engineering
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
317.554 VU 2024W
2.03.0
VO Sandwich Structures
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Energietechnik - Aspekte und Anwendungen
14.0
SE Selected Aspects of Energy Systems Selected Aspects of Energy Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VO Hydraulic Measuring and Testing
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Hydraulic Measuring and Testing
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VO Oil Hydraulics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
302.666 VO 2025S
2.03.0
VO Diagnostic and Maintenance of Hydr. Machines
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VO Modern Trends in Thermal Turbomachinery Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VU Numerical Process Simulation of Thermal Power Plants
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
UE Design and Calculation of Thermal Equipment
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VU Pollution Control at Thermal Power Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VO Airing and Air Conditioning Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VO Kältetechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.723 VO 2024W
2.02.0
Modul Energietechnik - Fortschrittliche Energieanlagen
14.0
VO Advanced Systems for Power Generation
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
3.04.0
VU Thermodynamics of Advanced and Alternative Energy Conversion Methods
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
SE Advanced and Alternative Energy Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
LU Advanced and Alternative Energy Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.02.0
1.02.0
VU Innovative Building Services
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.715 VU 2025S
2.02.0
Modul Energietechnik - Hydraulische Maschinen und Anlagen I & II
14.0
VO Hydraulische Maschinen und Anlagen I
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Hydraulische Maschinen und Anlagen I
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
2.02.0
LU Hydraulische Maschinen und Anlagen I
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
2.02.0
VO Hydraulic Machinery and Hydraulic Systems II
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Hydraulic Machinery and Hydraulic Systems II
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
SE Hydraulic Machinery and Hydraulic Systems II
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
2.02.0
Modul Energietechnik - Thermische Turbomaschinen I & II
14.0
VO Thermische Turbomaschinen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
302.672 VO 2024W
2.03.0
UE Thermische Turbomaschinen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.684 UE 2024W
2.02.0
LU Thermische Turbomaschinen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.694 LU 2025S
2.02.0
VO CFD for Thermal Turbomachines
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VU CFD for Thermal Turbomachines
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
SE Thermal Turbomachines
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.686 SE 2025S
2.02.0
Modul Energietechnik - Wärmetechnische Anlagen I & II
14.0
VO Wärmetechnische Anlagen 1
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Wärmetechnische Anlagen 1
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.687 UE 2025S
2.02.0
LU Wärmetechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
SE Thermal Engineering
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.688 SE 2024W
2.02.0
VO Equipment for Thermal Energy 2
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VO Modelling and Simulation of Thermodynamic Processes
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
Modul Fahrzeugsystemdynamik
14.0
VO Vehicle System Dynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.04.0
VO Special Problems of Vehicle Dynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
VO Stability of Motion
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Vehicle Dynamics Seminar
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Fertigungsautomatisierung
14.0
VO Automation and Control
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.092 VO 2025S
2.03.0
VO PLC: Programming and Industrial Communication
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
LU NC Programming
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
311.564 LU 2025S
2.02.0
311.564 LU 2024W
2.02.0
SE Manufacturing Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.122 SE 2025S
2.03.0
VO Robotik in der Fertigung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.186 VO 2025S
2.03.0
VO Production Planning and Control Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
Modul Fertigungsmesstechnik
14.0
VO Production Metrology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.138 VO 2025S
2.03.0
LU Production Metrology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
311.139 LU 2025S
2.02.0
LU Co-ordinate Measuring Machines
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VO Testing of Production Equipment
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
1.52.0
LU Testing of Production Equipment
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
SE Production Metrology - Seminar
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
Modul Fertigungssysteme I & II
14.0
VO Machining and Forming
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.106 VO 2024W
2.03.0
VO Industrielle Fertigungssysteme
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Industrielle Fertigungssysteme
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.0
1.01.0
1.01.0
VO Auslegung von Werkzeugmaschinen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.093 VO 2024W
2.03.0
VO Design of Industrial Robots
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Manufacturing Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.998 SE 2024W
2.03.0
LU Machining Laboratory
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.0
311.999 LU 2024W
1.01.0
Modul Finite Elemente Methoden in der Ingenieurspraxis I & II
14.0
VU Praxisgerechter Einsatz von FE-Methoden
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Modellbildung im Rahmen der Finite-Elemente-Methode
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
UE Finite Elemente in der Anwendung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Implementation of a Finite Element Program
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
VO Advanced Material Models for Structural Analysis
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Nonlinear Finite Element Methods
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Nonlinear Finite Element Methods
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Isogeometric Analysis
4.05.0
Modul Fördertechnik I & II
14.0
VO Continuous Handling Equipments
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
1.52.0
VO Steel Structures
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
307.435 VO 2025S
2.03.0
LU Lifting and Handling Systems and Conveying Appliances Laboratory Exercise
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VU Schüttgutsimulation
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
307.514 VU 2024W
2.03.0
VO Ropeway Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
307.436 VO 2025S
1.52.0
SE Lifting and Handling Systems and Conveying Appliances (with Excursion)
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
1.52.0
Modul Formula Student I&II
14.0
PR Formula Student
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
SE Konstruktionswettbewerb
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Teambuilding and Leadership
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
UE Höhere Konstruktionslehre und Produktentwicklung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VU Methodik der 3D-CAD Konstruktion
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
UE Virtuelle Produktentwicklung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
UE Design of Composite Structures using Finite Element Methods
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Praxisgerechter Einsatz von FE-Methoden
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
VU Programmieren mit MATLAB
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
LU Programmierung von Werkzeugmaschinen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Höhere Konstruktionslehre und Produktentwicklung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VO Virtuelle Produktentwicklung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Tribologie für Maschinenbauer
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Lightweight Design with Fiber-Reinforced-Polymers
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
VO Fügetechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Reifentechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Grundlagen der Entwurfsaerodynamik
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
VO Rennmotoren und Rennfahrzeuge
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
VO Design of Automotive Suspension Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
VO Kriterien zukünftiger Kraftfahrzeuge I
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
VO Kriterien zukünftiger Kraftfahrzeuge II
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
VO Zukünftige Antriebskonzepte
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
VO Alternative Antriebe
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Alternative Fahrzeugkonzepte und Komponenten
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Elektrische Antriebstechnik für MB und WIMB
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
VO Vertiefung Elektrotechnik und Elektronik für MB und WIMB
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
VU Grundlagen der Organisation
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Controlling
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Qualitätsmanagement in der Produktentwicklung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Enterprise Risk Management (Fundamentals)
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Verbundwerkstoffe und Verbunde
2.03.0
Modul Industrielle Energiesysteme und digitale Methoden
14.0
VO Einführung in industrielle Energiesysteme und digitale Methoden
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
1.52.0
VO Energiesystemmodellierung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
302.733 VO 2025S
2.03.0
UE Energiesystemmodellierung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
302.734 UE 2025S
2.02.0
VU Design- und Betriebsoptimierung
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
3.03.0
VU Numerische Prozesssimulation von thermischen Energieanlagen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
LU Automatisierungstechnik in der Wärmetechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
2.02.0
Modul Kraftfahrzeugantriebe I & II
14.0
VO KFZ-Antriebe
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
LU KFZ-Antriebe
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Alternative Antriebe
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
UE KFZ-Antriebe
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
SE KFZ-Antriebe
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
LU Laborübung Brennstoffzellenantrieb
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Wasserstoff und Brennstoffzellen - Energieträger und Energiewandler im Fahrzeug und in anderen Anwendungen
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
VO Thermodynamic Principles of Propulsion Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.51.5
VO Motor- und Fahrzeugsteuerungen
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
Modul Kraftfahrzeugtechnik I & II
14.0
VO KFZ-Technik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
LU KFZ-Technik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Automated driving and alternative vehicle technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
UE Design of Automotive Suspension Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
SE Car Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
VO Nutz- und Sonderfahrzeuge
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.51.5
VO Elektrische Speicher für Fahrzeuge
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.5
Modul Lasergestützte Fertigung
14.0
VO Laser Processing Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.126 VO 2025S
2.03.0
VO Laser Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.132 VO 2024W
2.03.0
VO Precision Maching with Lasers
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
SE Laser Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
311.128 SE 2025S
2.03.0
UE Laboratory Tutorial
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
311.127 UE 2025S
2.02.0
Modul Leichtbau I & II
14.0
VU Analytische Methoden des Leichtbaus
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
LU Analytische Methoden des Leichtbaus
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Numerische Methoden des Leichtbaus
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
LU Numerische Methoden des Leichtbaus
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Stabilitätsprobleme der Elastostatik
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
SE Light Weight Structures
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Advanced Material Models for Structural Analysis
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Optimum Structural Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
VO Sandwich Structures
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Luftfahrtgetriebe
14.0
VO Transmissions for Aviation
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
307.459 VO 2025S
2.03.0
LU Transmissions for Aviation
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
307.460 LU 2024W
3.03.0
UE Luftfahrtgetriebe Konstruktionsübung
???steg_ok???
Courses require the completion of the introductory and orientation phase
5.05.0
VO Rotorcraft Design, -Aeromechanik und -konfigurationen und ihre Auswirkungen auf das Getriebedesign
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Aircraft Design
14.0
VU Aircraft Design I
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
VU Aircraft Design II
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
SE Seminar on Aircraft Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
Module Aircraft Systems
14.0
VU Aircraft Systems Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
VU Systems Engineering
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
LU Flight Lab
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Aeronautical Seminar
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.52.0
Modul Maschinenelemente und Tribologie
14.0
LU Maschinenelemente
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
307.496 LU 2025S
3.03.0
VO Tribologie der Maschinenelemente
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Geschmierte Kontakte - Einführung in die Schmierstoff-Oberflächenwechselwirkungen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Specific Machine Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
307.456 VO 2025S
2.03.0
UE Specific Machine Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Getriebe Ausgewählte Kapitel
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Getriebe Ausgewählte Kapitel
???steg_ok???
Courses require the completion of the introductory and orientation phase
5.05.0
Modul Mechatronische Systeme
14.0
VU Finite Elemente für gekoppelte Feldprobleme I
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
LU Labor Mechatronische Systeme
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
SE Seminar Mechatronische Systeme
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
VO Finite Elemente für gekoppelte Feldprobleme II
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Finite Element Methods for Multi-Physics II
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Strömungsakustik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Elektro-aktive Strukturen
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.04.0
VO Identifikation - Experimentelle Modellbildung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Numerische Strömungsmechanik
14.0
VU Numerische Methoden der Strömungsmechanik
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.05.0
4.05.0
VO Turbulente Strömungen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Calculating Turbulent Flows with CFD-Codes
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
SE Seminar Turbulenz
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
322.059 SE 2024W
2.03.0
VU Numerische Modellierung turbulenter Strömungen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
Modul Produktentwicklungsmethodik und Ecodesign
14.0
VO Engineering Design and Development of New Products
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Engineering Design and Development of New Products
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
VO Product Development, Innovation and ECO-Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
SE Ecodesign, Sustainable Product Development
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
VO Product Lifecycle Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
UE Product Lifecycle Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.0
Modul Rehabilitationstechnik
14.0
VO Rehabiltation Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Prosthesis
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Technical Restoration of Body Functions by Means of FES
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
LU Rehabilitation Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Rehabilitation Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Schienenfahrzeugbau
14.0
VO Rail Vehicle Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
307.441 VO 2024W
2.03.0
SE Rail Vehicle Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
307.442 SE 2025S
2.03.0
UE Rail Vehicle Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.0
307.443 UE 2024W
1.01.0
LU Rail Vehicle Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
307.444 LU 2025S
2.02.0
UE Rail Vehicle Design
???steg_ok???
Courses require the completion of the introductory and orientation phase
5.05.0
307.445 UE 2024W
5.05.0
Module Student Aerospace I&II
14.0
PR Student Aerospace Projektarbeit
4.05.0
SE Konstruktionswettbewerb
2.02.0
VU Methodik der 3D CAD Konstruktion
2.02.0
VO Ingenieurwerkstoffe
1.52.0
VU Werkstoffdiagnostik
2.02.0
VU Additive Manufacturing Technologies
2.02.0
VO Angewandte Fluidmechanik
2.02.0
322.076 VO 2025S
2.02.0
VU Projekt- und Prozessmanagement
1.52.0
VO Virtuelle Produktentwicklung
2.03.0
UE Virtuelle Produktentwicklung
2.02.0
VU Teambuilding and Leadership
3.03.0
UE Auslegung von Composite-Strukturen
2.02.0
VO Metallische Hochtemperaturwerkstoffe
2.03.0
VO Leichtbau mit faserverstärkten Werkstoffen
2.03.0
VU Wärmeübertragung
3.05.0
322.046 VU 2024W
3.05.0
LU Werkstoffprüfung 2
1.01.0
VO Light Metals
2.03.0
VU Leichtbau
4.05.0
LU Leichtbau - Labor
2.02.0
SE Light Weight Structures
2.02.0
VU Composites Engineering
2.03.0
317.554 VU 2024W
2.03.0
VO Numerische Methoden der Strömungsmechanik
2.03.0
UE Numerische Methoden der Strömungsmechanik
2.02.0
VU Gas- und Aerodynamik
3.05.0
322.075 VU 2025S
3.05.0
SE Seminar Strömungsmechanik
2.03.0
322.060 SE 2025S
2.03.0
2.03.0
VO Dynamik und Steuerung von Raumfahrzeugen
2.03.0
VO Rotorcraft Design und Auswirkungen auf das Getriebedesign
2.03.0
VU Finite Elemente Methoden für gekoppelte Feldprobleme I
3.04.0
Modul Technische Dynamik
14.0
VO Rotordynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Rotordynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Computer Aided Methods for Dynamical Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Computer Aided Methods for Dynamical Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Spezielle Probleme der Mehrkörpersystemdynamik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
LU Engineering Dynamics - Laboratory Course
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Seminar Engineering Dynamics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Technische Logistik
14.0
VO Förder- und Transporttechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
UE Förder- und Transporttechnik Konstruktionsübung
???steg_ok???
Courses require the completion of the introductory and orientation phase
4.04.0
4.04.0
VO Technical Logistics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
307.425 VO 2024W
2.03.0
VO Simulation of Transport Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
UE Simulation of Transport Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
2.02.0
Modul Thermo-elektro-elastische Strukturmechanik
14.0
VU Linientragwerke
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.0
VU Flächentragwerke
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Computerunterstützte Strukturmechanik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
LU Mechanik dünner Strukturen
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
SE Mechanik dünner Strukturen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Werkstoffanwendung
14.0
VO Joining Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Surface Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Corrosion
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.03.0
VU Schadensanalyse
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Computer Use in Materials Technology
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.02.0
VO Atomistic Materials Modelling
2.03.0
Modul Werkstoffeinsatz I & II
14.0
VO Werkstoffauswahl
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Light Metals
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Werkstoffkreislauf
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Service Strength
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
LU Bruchmechanik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Materials Diagnostics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
Modul Werkstoffverarbeitung
14.0
VO Kunststofftechnik
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Additive Manufacturing Technologies
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Materials Processing
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VO Biomaterials
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Biokompatible Werkstoffe
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
EX Materials Processing
???steg_ok???
Courses require the completion of the introductory and orientation phase
1.01.0
Modulgruppe Vertiefungsmodule "Betriebswissenschaften"
Modul Entrepreneurship and Innovation
14.0
VO Entrepreneurship
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU E&I Garage
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.05.0
VU Innovation Theory
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Entrepreneurship and Innovation
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Financial Management
14.0
VU Project and Enterprise Financing
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Financial Management and Reporting
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Advanced Financial Planning and Control
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Financial Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.05.0
Modul Industrial Engineering
14.0
VU Industrial Engineering
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Assistenzsysteme in der Produktion 1
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Montage I: Grundlagen
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Cobot Studio@Pilotfabrik Industrie 4.0
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Industrial Engineering
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Module Leadership, Strategy & Change Management
14.0
VO Leadership, Strategy & Change Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Leadership
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Strategy
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Change Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Leading Strategic Change
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.05.0
Modul Logistikmanagement
14.0
VO Supply Chain Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Logistics in Automotive Industry
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VO Instandhaltungs- und Zuverlässigkeitsmanagement
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.53.0
UE PROST - Produktionssteuerung
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
SE Logistics Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Module Managing People & Organizations
14.0
VU Managing People & Organizations
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Organization Theory
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.05.0
VU Technology, Work & Organization
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Research Seminar Organization
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
Modul Production Information Management (PIM)
14.0
VO Knowledge Management 4.0
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
UE Industrial Data Science
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.02.0
VU Production Information Management Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Digital Simulation of Ergonomics and Robotics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Seminararbeit Smart Production Systems
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
2.03.0
2.03.0
Modul Risk Management
14.0
VU Enterprise Risk Management - Basics
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Risk Model Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
VU Risk-based Performance Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
2.03.0
SE Risk Management
???steg_ok???
Courses require the completion of the introductory and orientation phase
3.05.0
Prüfungsfach Fachgebundene Wahl
18.0
Modulgruppe Weitere Module
Fachgebundene Wahl
18.0
VO Einführung in die Biomedizinische Technik
2.03.0
VO Industrial seminar of energy technology
2.03.0
2.03.0
EX Study trip in thermal turbomachines and power plants
2.02.0
2.02.0
VO Betrieb von Gas- und Dampfturbinen
2.03.0
VO Transmissions - Selected Topics
2.03.0
2.03.0
UE Transmissions - Selected Topics
5.05.0
VU Methodik der 3D-CAD Konstruktion
2.02.0
VO Metallic High Temperature Materials
2.03.0
VO Polymers for Special Applications
2.03.0
PR Analyse des Bauteilversagens
4.04.0
PR Materials Selection
4.04.0
VU Werkstoffprüfung
4.04.0
VU Werkstoffcharakterisierung und zerstörungsfreie Prüfung
2.53.0
SE Imaging metals by X-rays. electrons, and neutrons
3.03.0
VO Examination of material failures in production plants
2.03.0
LU Methods for material assessment
2.02.0
SE Materials for Mechanical Engineering
2.03.0
VU Schweißgerechte Konstruktion
3.03.0
VO Basics of Laser Technology
2.03.0
311.136 VO 2024W
2.03.0
VU Modelling and Simulation in Production Technology
2.03.0
2.03.0
VO Intelligent Manufacturing Systems
2.03.0
2.03.0
VO Basic Nanotechnology and Nanometrology
2.03.0
2.03.0
VO Principles of QM, Testing and Certification
2.03.0
VU Energieeffiziente Produktion
2.03.0
2.03.0
VO Weiterentwicklung des Ottomotors
1.01.5
PA Project Work in Environmental Impacts of Automotive Engines
4.04.0
VO Criteria of future automobiles I
1.01.5
1.01.5
VO Criteria of future automobiles II
1.01.5
VO Future Drive Concepts
1.01.5
315.059 VO 2025S
1.01.5
VO Racing engines and racing cars
1.01.5
VO Neue Mobilitäts-, Karosserie- und Technologiekonzepte
1.01.5
VO Applied Hydrostatics and Hydrodynamics of Ships
2.03.0
VO Advanced Space Propulsion Systems
2.03.0
VO Introduction to aircraft
2.03.0
VO Rotor Craft
2.03.0
VO Aircraft Design
2.03.0
VO Strukturanalysen im Schienenfahrzeugbau
SE Machine Learning in Engineering Applications
2.02.0
VO Biomedical Fluid Mechanics
2.03.0
UE Presentation of methods in mechanics
2.02.0
SE Presentation of methods in mechanics
2.02.0
VO Finite elasticity
2.03.0
VO Condition Monitoring of Machinery
2.02.0
VO Tire Technology
2.03.0
VO Adaptive and Predictive Control
2.03.0
UE Adaptive and Predictive Control
1.01.0
VO Industrial Realtime Control Systems and Information Technology
2.02.0
UE Identification - Experimental Modeling
1.01.0
SV Hamiltonian Systems
2.03.0
VO Dynamics and Control of space vehicles
2.03.0
SE Dynamical Systems
2.02.0
VU Qualitätsmanagement
2.03.0
VO Moderne Qualitätsstrategien
1.02.0
VU Moderne Methoden im Produktionsmanagement
2.03.0
VO Marktpositionierung und Wertschöpfung in der Automobil-Zulieferindustrie
VO Lean Transformation
1.02.0
VU Simulation and Optimization
VO Identifikation - Experimentelle Modellbildung
2.03.0
VO Systemplanung
2.03.0
VO Unternehmensrecht
2.03.0
VU Innovation Management and Marketing
2.03.0
VU International Negotiations
2.03.0
VO Product Management
1.02.0
VO Strategies in Automotive Industry
1.02.0
VU Fabrikplanung und -betrieb
4.05.0
VU Digital Factory Planning
2.03.0
VU Assistenzsysteme in der Produktion 2
2.03.0
SE Montage II: Advanced Manufacturing
2.03.0
PR Integrative Produktentstehung
4.05.0
311.148 PR 2025S
4.05.0
VU Projekt- und Prozessmanagement
1.52.0
VU Strategic Management
2.03.0
VU Circular Economy Management
2.03.0
VO Nachhaltige Wertschöpfungssysteme
2.03.0
Prüfungsfach Allgemeine wissenschaftliche Bildung und fachübergreifende Qualifikationen
9.0
Modulgruppe Weitere Module
Modul Allgemeine wissenschaftliche Bildung und fachübergreifende Qualifikationen
9.0
Prüfungsfach Diplomarbeit
30.0
Modulgruppe Weitere Module
Modul Diplomarbeit
30.0
Seminar für Diplomanden und Dissertanten
Modulgruppe Seminar für Diplomanden und Dissertanten
Modul Seminar für Diplomanden und Dissertanten
SE Seminar for Master and PhD students
3.03.0
3.03.0
3.03.0
3.03.0
3.03.0
Diploma thesis and final exam
30.0
Thesis Diploma thesis
27.0
Final exam Final board exam
3.0
Responsible dean of academic affairs
For questions regarding the curriculum please contact the responsible dean of academic affairs.

Legend

Courses belong to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
Courses belong to the introductory interview ("Studieneingangsgespräch")
Courses require the completion of the introductory and orientation phase
Courses require the completion of the introductory interview STEG