322.050 Fluid Mechanics 2
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2018W, UE, 1.0h, 2.0EC

Properties

  • Semester hours: 1.0
  • Credits: 2.0
  • Type: UE Exercise

Aim of course

Give Engineering students a deeper and more thorough grounding in principles and fundamental applications of fluid mechanics.

Subject of course

Exercises and applications on:

  • Lecture 1 - Adimensionalization
  • Lecture 2 - Creeping Flow           
  • Lecture 3 - Lubrication theory I
  • Lecture 4 - Lubrication theory II
  • Lecture 5 - Application of Lubrication theory
  • Lecture 6 - Potential flow
  • Lecture 6 - Potential flow and drag on slender body
  • Lecture 7 - D' Alembert paradox
  • Lecture 8 - Boundary layer: theory and Stokes problem
  • Lecture 9 - Boundary layer: flat plate, Blasius solution, separation and classification
  • Lecture 10 - Turbulence phenomena and modelling
  • Lecture 11 - Modelling of the Reynolds stresses
  • Lecture 12 - Law of the wall (Turbulent flow in a pipe)
  • Lecture 13 – Summary exercises

Additional information

This course is held in 4 groups, please register for either group.

NOTE: UE lectures will start on Monday October 8th 

 

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Tue15:00 - 16:1502.10.2018 - 22.01.2019EI 2 Pichelmayer HS z_
Wed14:00 - 15:1503.10.2018 - 23.01.2019EI 5 Hochenegg HS z__
Mon10:00 - 11:0008.10.2018 - 21.01.2019EI 3A Hörsaal Group 1 - Posch
Tue13:00 - 14:1509.10.2018 - 22.01.2019Seminarraum BA 08A Group 2 - Giurgiu
Wed14:30 - 15:4510.10.2018 - 23.01.2019Seminarraum BA 08A z___
Thu08:30 - 10:0011.10.2018 - 24.01.2019EI 1 Petritsch HS Group 3 - Heindl
Fri08:30 - 10:0012.10.2018 - 18.01.2019Seminarraum BA 08A Group 4 - Marecek
Fluid Mechanics 2 - Single appointments
DayDateTimeLocationDescription
Tue02.10.201815:00 - 16:15EI 2 Pichelmayer HS z_
Wed03.10.201814:00 - 15:15EI 5 Hochenegg HS z__
Mon08.10.201810:00 - 11:00EI 3A Hörsaal Group 1 - Posch
Tue09.10.201813:00 - 14:15Seminarraum BA 08A Group 2 - Giurgiu
Tue09.10.201815:00 - 16:15EI 2 Pichelmayer HS z_
Wed10.10.201814:00 - 15:15EI 5 Hochenegg HS z__
Wed10.10.201814:30 - 15:45Seminarraum BA 08A z___
Thu11.10.201808:30 - 10:00EI 1 Petritsch HS Group 3 - Heindl
Fri12.10.201808:30 - 10:00Seminarraum BA 08A Group 4 - Marecek
Mon15.10.201810:00 - 11:00EI 3A Hörsaal Group 1 - Posch
Tue16.10.201813:00 - 14:15Seminarraum BA 08A Group 2 - Giurgiu
Tue16.10.201815:00 - 16:15EI 2 Pichelmayer HS z_
Wed17.10.201814:00 - 15:15EI 5 Hochenegg HS z__
Wed17.10.201814:30 - 15:45Seminarraum BA 08A z___
Thu18.10.201808:30 - 10:00EI 1 Petritsch HS Group 3 - Heindl
Fri19.10.201808:30 - 10:00Seminarraum BA 08A Group 4 - Marecek
Mon22.10.201810:00 - 11:00EI 3A Hörsaal Group 1 - Posch
Tue23.10.201813:00 - 14:15Seminarraum BA 08A Group 2 - Giurgiu
Tue23.10.201815:00 - 16:15EI 2 Pichelmayer HS z_
Wed24.10.201814:00 - 15:15EI 5 Hochenegg HS z__

Examination modalities

 

Tests Administration:

  • midterm exam: covers the first part of the course program;
  • final exam: covers the second part of the course program;
  • ''replacement exam'' (nachtest): covers the entire course program and is held after the final exam.

Exam duration: 1h30min.

To receive a grade the student must:

  1. attend at least 11 UE lectures. If a student did not complete the assigned homework BUT is in the class, he/she is considered an attendee.
  2. complete 50% (minimum) of all the exercises assigned in the homeworks (completed exercises must be confirmed on TUWel).
  3. Homeworks may be checked by the tutors every lecture. If a student has not completed an exercise which is marked in TUWel, the entire homework will be considered as unresolved.
  4. take at least two exams (this accounts for all unforeseen occurrences such as, illnesses, accidents, family emergencies, etc.). If all three exams are taken, the lowest score will be eliminated from final grade calculation. 

Structure of each exam: 
All exams are tests in written form. Each test has two or more problems. Each problem may have two or more questions. A score is assigned to each question so that the maximum score that can be achieved for a perfect test is 100. Maximum score of the exam is 200.

Scores:

Scores will be assigned according with the following table:

SCORE                GRADE
<100   -> (fail)            5
100-130 -> (pass)      4
131-147 -> (pass)      3
148-170 -> (pass)      2
>171 -> (pass)           1

One exam scoring less than 25 will be considered “not taken”.

Group dates

GroupDayTimeDateLocationDescription
Gruppe 1 - PoschMon10:00 - 11:1508.10.2018 - 21.01.2019EI 3A Hörsaal 322.050 Fluid Mechanics 2 Gruppe 1 - Posch
Gruppe 2 - GiurgiuTue13:00 - 14:1509.10.2018 - 22.01.2019Seminarraum BA 08A 322.050 Fluid Mechanics 2 Gruppe 2 - Giurgiu
Gruppe 3 - HeindlThu08:30 - 09:4511.10.2018 - 24.01.2019EI 1 Petritsch HS 322.050 Fluid Mechanics 2 Gruppe 3 - Heindl
Gruppe 4 - MarecekFri08:30 - 09:4512.10.2018 - 18.01.2019Seminarraum BA 08A 322.050 Fluid Mechanics 2 Gruppe 4 - Marecek
z_Tue14:30 - 15:4502.10.2018 - 22.01.2019EI 2 Pichelmayer HS 322.050 Fluid Mechanics 2 z_
z__Wed14:00 - 15:1503.10.2018 - 23.01.2019EI 5 Hochenegg HS 322.050 Fluid Mechanics 2 z__
z___Wed14:30 - 15:4510.10.2018 - 23.01.2019Seminarraum BA 08A 322.050 Fluid Mechanics 2 z___

Course registration

Begin End Deregistration end
24.09.2018 00:00 17.10.2018 23:59 07.11.2018 23:59

Registration modalities:

Please register also in on of the groups.

Group Registration

GroupRegistration FromTo
Gruppe 1 - Posch04.10.2018 00:0007.10.2018 23:59
Gruppe 2 - Giurgiu04.10.2018 00:0007.10.2018 23:59
Gruppe 3 - Heindl04.10.2018 00:0007.10.2018 23:59
Gruppe 4 - Marecek04.10.2018 00:0007.10.2018 23:59
z_31.12.2018 00:0031.12.2018 23:59
z__31.12.2018 00:0031.12.2018 23:59
z___31.12.2018 00:0031.12.2018 23:59

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase
066 445 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
066 482 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase

Literature

Future homeworks and lectures will be provided on TUWel

Preceding courses

Accompanying courses

Miscellaneous

  • Attendance Required!

Language

English