315.728 Automotive Powertrains
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2018W, VO, 2.0h, 3.0EC

Properties

  • Semester hours: 2.0
  • Credits: 3.0
  • Type: VO Lecture

Aim of course

Basics for Powertrain of Automotive. Additonally lectures in this module extension to fully understanding of the specific technical field. Starting with enegy conversion for driving and traction forces, lecture details the internal combustion engine, due to the fact it is the core energy converter for time being and short terms.

Alternative powertrains will be presented in LVA "Alternative Powertrains" of this module.

Last chapter of this lecture covers the field of interaction between engine and transmission down to the driving wheels of a vehicle. Gear shifting strategies are a main issue.

Subject of course

A basic overview of the area of powertrain for automotive is given in 13 chapters.

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Tue08:00 - 10:0002.10.2018 - 22.01.2019GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Automotive Powertrains - Single appointments
DayDateTimeLocationDescription
Tue02.10.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue09.10.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue16.10.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue23.10.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue30.10.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue06.11.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue13.11.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue20.11.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue27.11.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue04.12.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue11.12.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue18.12.201808:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue08.01.201908:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue15.01.201908:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe
Tue22.01.201908:00 - 10:00GM 4 Knoller Hörsaal - TCH KFZ-Antriebe

Examination modalities

Please note: There is a slight change regarding the examination modalities starting January 2017:

Exam questions will not be taken exclusively from the exam questions catalogue, there will be additional questions which will not be disclosed previously.


Written exam on the dates posted in TISS.

Written exams take place once in the month (except in August).

Due to possible lecture room or date changes please watch your TISS-News shortly before the exam date. We do our best to keep the scheduled date. In this sense, we ask for reliable registration and deregistration within the time limit, so that the appointment can take place as announced!

Registrations and deregistrations can be done until Wednesday 12 o`clock before the respective exam date. Exam registrations are only possible after the previous exam date. Deregistrations after the deadline can not be considered.

PLEASE NOTE: Due tot he fact, that the written exams take place parallel, it is not allowed to registrate for more than 1 exam per date!!! Multiple filings will not be tolerated.

Exclusions from exams in accordance with paragraph 18a University Matriculation Law: Non-appearing students missing to deregister in time will be blocked for the next two exams (8 weeks)!

Exam mode: The examination results will be postet until the 2nd Wednesday after the exam date. Students between two examination marks (1 and 2, 4 and 5) will be informed per e-mail and shall have the opportunity to an oral test, usually Fridays two weeks after the written exam date. Non-appearing students receive the worse mark.

Clef:

100-91 points:      "Very Good" (1)

90-80 points:        mündliche Prüfung

79-72 points:        "Good" (2)

71-64 points:        "Average" (3)

63-56 points:        "Below Average" (4)

55-45 points:        mündliche Prüfung

44-0   points:        "Unsatisfactory" (5)

 

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri - 18.09.2020written17.07.2020 12:00 - 16.09.2020 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri08:00 - 11:0002.10.2020GM 4 Knoller Hörsaal - TCH written11.09.2020 12:00 - 30.09.2020 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri08:00 - 11:0006.11.2020GM 4 Knoller Hörsaal - TCH written02.10.2020 12:00 - 04.11.2020 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri07:30 - 09:0004.12.2020GM 4 Knoller Hörsaal - TCH written06.11.2020 12:00 - 02.12.2020 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri07:30 - 09:0015.01.2021GM 4 Knoller Hörsaal - TCH written04.12.2020 12:00 - 13.01.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri08:00 - 11:0005.02.2021GM 2 Radinger Hörsaal - TCH written15.01.2021 12:00 - 03.02.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri07:30 - 09:0012.03.2021GM 4 Knoller Hörsaal - TCH written05.02.2021 12:00 - 10.03.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri - 02.04.2021written12.03.2021 12:00 - 31.03.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri - 14.05.2021written02.04.2021 12:00 - 12.05.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri - 04.06.2021written14.05.2021 12:00 - 02.06.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Sat15:00 - 17:0026.06.2021GM 1 Audi. Max.- ARCH-INF written26.05.2021 08:00 - 22.06.2021 12:00TISSPrüfung
Sat11:30 - 13:3003.07.2021GM 1 Audi. Max.- ARCH-INF written22.06.2021 13:00 - 29.06.2021 12:00TISSPrüfung
Fri - 16.07.2021written04.06.2021 12:00 - 14.07.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin
Fri - 17.09.2021written16.07.2021 12:00 - 15.09.2021 12:00TISSAllgemeiner Prüfungstermin E315 Paralleltermin

Course registration

Begin End Deregistration end
01.09.2018 08:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase
066 445 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
066 482 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase

Literature

Scripts and exam questions (in German!) on TISS available.

Previous knowledge

Basic knowledge in Thermodynamics is essentially. Interest for Automotive and Powertrain.

Language

German