311.108 Workshop on Production Technology
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2021W, PR, 4.0h, 2.0EC
TUWEL

Properties

  • Semester hours: 4.0
  • Credits: 2.0
  • Type: PR Project
  • Format: Presence

Learning outcomes

After successful completion of the course, students are able to deepen in the lecture bases of the production engineering to provided knowledge mainly in the area of the chip ends manufacturing, however, also in the area of the manufacturing without chip by independent application of the procedures in machines of the lab for production engineering and the lab of the institute of Umformtechnik and high-capacity laser technology

Subject of course

Production of work pieces by means of the procedures wooden processing, forging, welding, milling, drilling, grinding in conventional machines and NC machines 

Teaching methods

practical practise with explanations of the technology in the respective machines

Mode of examination

Immanent

Additional information

INFO for registration: only one LVA registration is not enough, the group registration applies primarily!

With the training period in the lab for production engineering the following is to be followed for safety reasons: - Working clothes (long trousers and long sleeved outerwear - clothes where soiling plays no role) - closed footwear - hair protection (cap, hair-band, etc.) with long hair

Welding gloves, working gloves as well as protective glasses can be acquired if not available at the beginning of the practise in the lab.

At the end of the practise a protocol is to be provided.

--> for further information see moreover: TUWEL

ATTENTION: for HTLer there is a shortened practise procedure-> own appointment (Proof necessarily)

Abbreviations in the group registration:
H1..  stands for appointment 1 for HTLer
S1..  stands for appointment 1 in the Sommersemster
W1.. stands for appointment 1 in the Wintersemster
 
-> for further information see moreover: TUWEL
 
Immediately after registration, a schedule with the possible practice days will be sent to everyone (regular places and waiting list places) per Mail. In this case, the times at which a collision with other exercises or tests exists must be entered. 
In order to be able to implement the blocked exercise drugstore, however, it is only possible to choose a maximum of 2 days. This acknowledgement must be made ex marte. If this is not done within the time limit, 
the practice site will be forwarded to users of the waiting list. For more details, see also TUWEL.

PRESENCE DUTY is valid for the preliminary discussion (currently in the form of a ZOOM Meeting), by prevention absolutely by mail (mertz@ift.at) on time answer give otherwise the practise place gets lost, the place will award to StudentenInnen from the waiting list. Join the ZOOM Meeting waiting room in a timely manner!

The training days are already allocated before or immediately after the preliminary meeting. This can be generally or up to 2 days later on TUWEL. Currently, the training schedule is sent with the invitation data of the ZOOM meeting before the preliminary meeting.

MEETING PLACE on site and Journey plan: see in the German description

Lecturers

Institute

Examination modalities

permananet during the practise, as well as a protocol about the practise

Group dates

GroupDayTimeDateLocationDescription
HTLer Termin H1 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!Wed09:00 - 10:0017.11.2021 Zoom Meeting311.108 Workshop on Production Technology H1 !!!Nur für HTL-Absolventen die metallbearbeitende Werkstätten besuchten!!!Zeugnis-Kopie!!!
HTLer Termin H2 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!Tue13:00 - 14:0011.01.2022 Zoom Meeting311.108 Workshop on Production Technology H2 !!!Nur für HTL-Absolventen die metallbearbeitende Werkstätten besuchten!!!Zeugnis-Kopie!!!
W1 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed10:00 - 10:4506.10.2021 Zoom Meeting311.108 Workshop FET-Lab W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:30 - 16:0011.10.2021 - 22.10.2021Seminarraum O221-2 311.108 Workshop on Production Technology W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W2 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0020.10.2021 Zoom Meeting311.108 Workshop FET-Lab W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:30 - 16:0025.10.2021 - 09.11.2021Seminarraum O221-2 311.108 Workshop on Production Technology W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W3 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0010.11.2021 Zoom Meeting311.108 Workshop on Production Technology W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:30 - 16:0016.11.2021 - 30.11.2021Seminarraum O221-2 311.108 Workshop on Production Technology W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W4 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0001.12.2021 Zoom Meeting311.108 Workshop FET-Lab W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:30 - 16:0006.12.2021 - 17.12.2021Seminarraum O221-2 311.108 Workshop on Production Technology W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W5 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0022.12.2021 Zoom Meeting311.108 Workshop FET-Lab W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:30 - 16:0010.01.2022 - 21.01.2022Seminarraum O221-2 311.108 Workshop on Production Technology W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W6 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed13:00 - 14:0019.01.2022 Zoom Meeting311.108 Workshop on Production Technology W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:30 - 16:0024.01.2022 - 04.02.2022Seminarraum O221-2 311.108 Workshop on Production Technology W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten

Course registration

Use Group Registration to register.

Precondition

The student must have at least all of the course(s) completed listed below:

Group Registration

GroupRegistration FromTo
HTLer Termin H1 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!01.11.2021 08:0007.11.2021 00:00
HTLer Termin H2 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!06.01.2022 08:0011.01.2022 00:00
W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten27.09.2021 08:0030.09.2021 12:00
W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten11.10.2021 08:0014.10.2021 12:00
W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten25.10.2021 08:0027.10.2021 12:00
W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten22.11.2021 08:0024.11.2021 12:00
W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten13.12.2021 08:0015.12.2021 12:00
W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten10.01.2022 08:0012.01.2022 12:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 2. Semester
033 282 Mechanical Engineering - Management 2. Semester

Literature

No lecture notes are available.

Miscellaneous

  • Attendance Required!

Language

German