On July 30th, 2024, due to an important database update, there will be service interruptions in the Student Self-Service and Workforce Management areas between 8 AM and 11 AM. Thank you for your understanding.

308.868 Engineering Materials
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2017W, VO, 1.5h, 2.0EC
TUWEL

Properties

  • Semester hours: 1.5
  • Credits: 2.0
  • Type: VO Lecture

Aim of course

Please sign up for this course (see below) and then use the Link to TUWEL for getting access to the course materials, which are also available in the Secretariat (Mo-Fr: 9-12 and 13-17 o'clock), Getreidemarkt 9, building BE, 4. floor.

Overview on the variety of engineering materials for various industrial applications. The material properties are defined by their composition, processing and shaping techniques.

Subject of course

Systematic of metallic alloys with focus on Al-, Ti-, Ni-alloys and highmelting metals (with a short overview on special steels, Mg-, Cu-, Co-alloys and amorphous metals). Improvement of strength and thermal stability. Microstructure and properties influenced by processing technologies like casting, powder metallurgy, hot forming, and cold forming.

Overview on ceramic materials and hard metals.

Systematic of engineering plastics (high temperature polymers, shape memory polymers, composites).

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Thu13:45 - 15:0005.10.2017GM 2 Radinger Hörsaal - TCH Vorlesung
Thu13:45 - 15:3012.10.2017 - 25.01.2018GM 2 Radinger Hörsaal - TCH Vorlesung
Wed12:30 - 14:3017.01.2018GM 2 Radinger Hörsaal - TCH Ingenieurwerkstoffe
Engineering Materials - Single appointments
DayDateTimeLocationDescription
Thu05.10.201713:45 - 15:00GM 2 Radinger Hörsaal - TCH Vorlesung
Thu12.10.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu19.10.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu09.11.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu16.11.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu23.11.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu30.11.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu07.12.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu14.12.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu21.12.201713:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu11.01.201813:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Wed17.01.201812:30 - 14:30GM 2 Radinger Hörsaal - TCH Ingenieurwerkstoffe
Thu18.01.201813:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung
Thu25.01.201813:45 - 15:30GM 2 Radinger Hörsaal - TCH Vorlesung

Examination modalities

Written and oral Exam!

Both parts of the exam (written and oral) need to be positive (>50 %.

During the lecture, it is possible to take part on the offered small tests. These are announced during the lecture. The points obtained will be added to the points of the written exam, if the exam is performed within the same year of study and at least 50% are obtained for the written part. It is not possible to worsen the result of the exam by taking part at the small tests.

The exams, written or oral, are based on the script.

Oral part: The oral exam is mandatory if the written part was between 50 and 55%, or if major sections of the written exam were below 50%. Typically, the oral part is 1-3 weeks after the written part. Procedure: 1h per group of 4-5 students (typically in teh BE building 4. floor). The subject matters of the oral part are the metallic and ceramic materials.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Wed14:00 - 16:0023.10.2024GM 1 Audi. Max.- ARCH-INF written01.10.2024 12:00 - 22.10.2024 07:00TISSPr. Mitte WS
Wed12:00 - 14:0011.12.2024GM 1 Audi. Max.- ARCH-INF written11.11.2024 08:00 - 10.12.2024 07:00TISSPr. Dez Letzter Termin voriges WS
Thu09:00 - 12:0030.01.2025GM 1 Audi. Max.- ARCH-INF written14.01.2025 08:00 - 30.01.2025 07:00TISSPr. Erster Termin aktuelles WS
Thu15:00 - 18:0013.03.2025GM 1 Audi. Max.- ARCH-INF written14.02.2025 12:00 - 12.03.2025 12:00TISSPr. Anfang SS
Fri10:00 - 12:0016.05.2025GM 1 Audi. Max.- ARCH-INF written11.04.2025 08:00 - 16.05.2025 07:00TISSMitte SS
Thu13:00 - 15:0026.06.2025GM 1 Audi. Max.- ARCH-INF written02.06.2025 08:00 - 26.06.2025 07:00TISSEnde SS

Course registration

Begin End Deregistration end
31.08.2017 12:00 16.12.2017 12:00 16.12.2017 12:00

Curricula

Study CodeObligationSemesterPrecon.Info
033 245 Mechanical Engineering Mandatory electiveSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management Mandatory electiveSTEOP
Course requires the completion of the introductory and orientation phase
066 445 Mechanical Engineering Mandatory electiveSTEOP
Course requires the completion of the introductory and orientation phase
066 482 Mechanical Engineering - Management Mandatory electiveSTEOP
Course requires the completion of the introductory and orientation phase

Literature

Für den Teil der Vorlesung "Ingenieurwerkstoffe" der die metallischen und keramischen Werkstoffe behandelt ist ein Skriptum verfügbar (auf Wunsch auch in Farbe). Darin sind auch die dafür empfohlenen Bücher aufgelistet.

Für den Teil der Polymeren Werkstoffe ist ebenfalls ein Skriptum verfügbar. Hierfür wird auch folgendes Buch empfohlen: „Hochleistungs-Kunststoffe“, L. Bottenbruch (Hrsg.), Hanser, München 1994.

Die einzelnen Skripten sind im Sekretariat des Institutes erhältlich (9-12 und 13-17 Uhr), Getreidemarkt 9 (Bauteil BE, 4. Stock).

Previous knowledge

Materials science of metallic materials

Preceding courses

Miscellaneous

Language

German