307.494 Machine Design 1
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022W, VO, 3.0h, 3.0EC
Lecture TubeTUWEL

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: VO Lecture
  • LectureTube course
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to...

- calculate and design selected machine elements according to standards and design guidelines

- perform design tasks on their own

- to recognize and evaluate pros and cons of machine elements under the relevant aspects of operation and design

Subject of course

Correct design and calculation of the following machine - and design-elements: Journal bearings and HD-theory, radial and axial-bearings, antifriction bearings-Hertzian pressure, theory of ball- and roller bearings, materials and strength, design and mounting of bearings, shafts calculation and design, critical speed and torsional vibrations, hubs, keys, seals, lubrication.

Teaching methods

- Lectures about basics and design/calculation tools for the listed content

- Practice and application of the content with examples of machine elements, with guidance by the lecturer.

Mode of examination

Written

Additional information

Lectures will be held in hybrid modus: in presence in Radinger Lecture room, BD Hoftrakt, in parallel  livestream and recording in lecture tube which is available in TUWEL afterwards.

Start of the lectures: Wednesday,, October 05th, 2022

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Wed14:00 - 16:0005.10.2022 - 25.01.2023GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon12:00 - 14:0010.10.2022 - 23.01.2023GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon12:00 - 14:0031.10.2022HS 18 Czuber - MB Vorlesung HS18
Mon12:00 - 14:0014.11.2022HS 18 Czuber - MB Vorlesung HS18
Machine Design 1 - Single appointments
DayDateTimeLocationDescription
Wed05.10.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon10.10.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed12.10.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon17.10.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed19.10.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon24.10.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon31.10.202212:00 - 14:00HS 18 Czuber - MB Vorlesung HS18
Mon07.11.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed09.11.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon14.11.202212:00 - 14:00HS 18 Czuber - MB Vorlesung HS18
Wed16.11.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon21.11.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed23.11.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon28.11.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed30.11.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon05.12.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed07.12.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon12.12.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed14.12.202214:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon19.12.202212:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO

Examination modalities

Exam only offered in German.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri10:00 - 15:0016.12.2022GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Fri12:00 - 15:0020.01.2023HS 8 Heinz Parkus - BI written06.01.2023 08:00 - 18.01.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0020.01.2023FH 8 Nöbauer HS - MATH written06.01.2023 08:00 - 18.01.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0020.01.2023HS 14A Günther Feuerstein written06.01.2023 08:00 - 18.01.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0020.01.2023Hörsaal 6 - RPL written06.01.2023 08:00 - 18.01.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0020.01.2023EI 7 Hörsaal - ETIT written06.01.2023 08:00 - 18.01.2023 23:45TISSPrüf. MEL Prof. Weigand
Wed10:00 - 15:0008.02.2023GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums writtenno application-Prüf. MEL Prof. Weigand mündl.
Thu08:00 - 11:0023.02.2023GM 2 Radinger Hörsaal - TCH written09.02.2023 08:00 - 21.02.2023 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0023.02.2023FH Hörsaal 1 - MWB written09.02.2023 08:00 - 21.02.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri10:00 - 15:0017.03.2023GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Fri11:00 - 14:0028.04.2023GM 1 Audi. Max.- ARCH-INF written10.04.2023 08:00 - 26.04.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri11:00 - 14:0028.04.2023FH Hörsaal 1 - MWB written10.04.2023 08:00 - 26.04.2023 23:45TISSPrüf. MEL Prof. Weigand
Mon10:00 - 14:0022.05.2023GM 4 Knoller Hörsaal - VT oralno application-Prüf. MEL Prof. Weigand mündl.
Fri08:00 - 11:0009.06.2023FH Hörsaal 1 - MWB written23.05.2023 08:00 - 07.06.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri08:00 - 11:0009.06.2023GM 5 Praktikum HS- TCH written23.05.2023 08:00 - 07.06.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri08:00 - 11:0009.06.2023HS 18 Czuber - MB written23.05.2023 08:00 - 07.06.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 17:0030.06.2023GM 4 Knoller Hörsaal - VT oralno application-Prüf. MEL Prof. Weigand mündl.
Thu08:00 - 11:0021.09.2023GM 2 Radinger Hörsaal - TCH written03.09.2023 08:00 - 19.09.2023 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0021.09.2023Informatikhörsaal - ARCH-INF written03.09.2023 08:00 - 19.09.2023 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0021.09.2023GM 5 Praktikum HS- TCH written03.09.2023 08:00 - 19.09.2023 23:45TISSPrüf. MEL Prof. Weigand

Course registration

Begin End Deregistration end
03.10.2022 00:00

Registration modalities

It ist not necessary to enroll into the course itself. However an enrollment is mandatory if you want to participate in the TUWEL-lectures

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management 3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

The lecture notes for machine design (€ 15.00) can be purchased on Monday, Tuesday, Wednesday and Thursday from 08:00 – 12:00 in the BD03 secretariat.

If possible, form “buying groups” (one person buys several scripts) - Thank you.

There is no PDF-version available!

Via TUWEL you can get handouts and worksheets of the lecture.

Additional literature:

  • Niemann-Winter-Höhn: Maschinenelemente
  • Steinhilper-Röper: Maschinen-u. Konstruktionselemente Bd. 1-3
  • Lecture notes of the course "Grundlagen der Konstruktionslehre" (LVA: 307.428) of Prof. Kartnig

Previous knowledge

An overview of all lectures about machine design can be found at http://www.ikp.tuwien.ac.at/mel

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German