307.427 Technical Drawing/CAD Engineering Training
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2020S, UE, 3.0h, 3.0EC

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: UE Exercise

Learning outcomes

After successful completion of the course, students are able to create 3D CAD models of components as well as assemblies with the help of a CAD system and to derive manufacturing and standard-compliant parts and assembly drawings.

Subject of course

Recording of dimensions of parts, production of freehand and CAD drawings of these parts, fundamental principles of design with 3D CAD, development of a project consisting of several individual parts (compilation of a module with CAD, manipulation and organisation of individual part drawings and the assembly drawing with a CAD program, compilation of parts list)

Teaching methods

Creating freehand sketches, introduction to using the 3D CAD software CATIA, creating 3D CAD models, creating an assembly, creating draft derivations.

Mode of examination

Immanent

Additional information

The groups are transferred from the WS to the SS, i.e. the groups will be created by us by the end of February and the participants from the winter semester will be uploaded by us.

A separate registration is possible from the beginning of the semester and is only required for students who have already completed the VU Technical Drawing / CAD 307.426 (previously 307.052) in the winter semester or in special cases for newcomers!

Attention:

The exercise groups AHS 1/2, 3, 7/8, 9, 13/14, 15 each start at 15:15 and end at 17:30.

The exercise groups AHS 4/5, 6, 10/11, 12 each start at 12:45 and end at 15:00.

Exercise groups VT 1/2 start at 9:15 and end at 11:30.

Lecturers

Institute

Examination modalities

Ongoing assessment, assessment of finished drawings, assessment of exercise examples.

Group dates

GroupDayTimeDateLocationDescription
AHS 1Tue15:00 - 18:0003.03.2020 - 10.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 1
AHS 2Tue15:00 - 18:0003.03.2020 - 10.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 2
AHS 3Tue15:00 - 18:0003.03.2020 - 10.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training AHS 3
AHS 4Wed12:00 - 15:0004.03.2020 - 11.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 4
AHS 5Wed12:00 - 15:0004.03.2020 - 11.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 5
AHS 6Wed12:00 - 15:0004.03.2020 - 11.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training AHS 6
AHS 7Wed15:00 - 18:0004.03.2020 - 11.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 7
AHS 8Wed15:00 - 18:0004.03.2020 - 11.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 8
AHS 9Wed15:00 - 18:0004.03.2020 - 11.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training AHS 9
AHS 10Thu12:00 - 15:0005.03.2020 - 12.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 10
AHS 11Thu12:00 - 15:0005.03.2020 - 12.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 11
AHS 12Thu12:00 - 15:0005.03.2020 - 12.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training AHS 12
AHS 13Thu15:00 - 18:0005.03.2020 - 12.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 13
AHS 14Thu15:00 - 18:0005.03.2020 - 12.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training AHS 14
AHS 15Thu15:00 - 18:0005.03.2020 - 12.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training AHS 15
HTL 1Fri14:00 - 16:0006.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training HTL 1
HTL 2Fri14:00 - 16:0006.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training HTL 2
HTL 3Fri14:00 - 16:0006.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training HTL 3
HTL 4Fri14:00 - 15:0013.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training HTL 4
HTL 5Fri14:00 - 15:0013.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training HTL 5
HTL 6Fri14:00 - 15:0013.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training HTL 6
HTL 7Fri15:00 - 16:0013.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training HTL 7
HTL 8Fri15:00 - 16:0013.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training HTL 8
VT AHS 1Wed09:00 - 12:0011.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training VT AHS 1
VT AHS 2Wed09:00 - 12:0011.03.2020CAD-Labor Saal 1 und 2 307.427 Technical Drawing/CAD Engineering Training VT AHS 2
VT AHS 3Wed09:00 - 12:0011.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training VT AHS 3
VT HTLWed09:00 - 12:0004.03.2020CAD-Labor Saal 3 307.427 Technical Drawing/CAD Engineering Training VT HTL

Course registration

Begin End Deregistration end
03.02.2020 08:00 03.02.2020 08:01

Group Registration

GroupRegistration FromTo
AHS 117.02.2020 12:0002.03.2020 12:00
AHS 217.02.2020 12:0002.03.2020 12:00
AHS 317.02.2020 12:0002.03.2020 12:00
AHS 417.02.2020 12:0002.03.2020 16:00
AHS 517.02.2020 12:0002.03.2020 16:00
AHS 617.02.2020 12:0002.03.2020 12:00
AHS 717.02.2020 12:0002.03.2020 16:00
AHS 817.02.2020 12:0002.03.2020 16:00
AHS 917.02.2020 12:0002.03.2020 12:00
AHS 1017.02.2020 12:0002.03.2020 12:00
AHS 1117.02.2020 12:0002.03.2020 12:00
AHS 1217.02.2020 12:0002.03.2020 12:00
AHS 1317.02.2020 12:0002.03.2020 12:00
AHS 1417.02.2020 12:0002.03.2020 12:00
AHS 1517.02.2020 12:0002.03.2020 12:00
HTL 117.02.2020 12:0005.03.2020 12:00
HTL 217.02.2020 12:0005.03.2020 12:00
HTL 317.02.2020 12:0005.03.2020 12:00
HTL 417.02.2020 12:0005.03.2020 12:00
HTL 517.02.2020 12:0005.03.2020 12:00
HTL 617.02.2020 12:0005.03.2020 12:00
HTL 717.02.2020 12:0005.03.2020 12:00
HTL 817.02.2020 12:0005.03.2020 12:00
VT AHS 117.02.2020 12:0008.03.2020 12:00
VT AHS 217.02.2020 12:0008.03.2020 12:00
VT AHS 317.02.2020 12:0002.03.2020 12:00
VT HTL17.02.2020 12:0003.03.2020 12:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 2. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
033 273 Chemical and Process Engineering 2. Semester
033 282 Mechanical Engineering - Management 2. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")

Literature

Frischherz, Piegler, Semrad: "Technisches Zeichnen, Fachzeichnen", Verlag Jugend & Volk

Previous knowledge

Completing VU 307.426 Technical Drawing / CAD is highly recommended!

Miscellaneous

  • Attendance Required!

Language

German