307.426 Technical Drawing/CAD This course is in all assigned curricula part of the STEOP.
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2019W, VU, 2.0h, 2.0EC

Properties

  • Semester hours: 2.0
  • Credits: 2.0
  • Type: VU Lecture and Exercise

Learning outcomes

After successful completion of the course, students are able to create technical drawings of general machine components according to the technical drawing standards and rules for production-oriented design.

Subject of course

During some lectures it will be tought, how workshop drawings have to be worked out in two dimensions based on geometry of the threedimensional space and according to standards. During exercise lessons simple workshop drawings have to be worked out, by free hand, with auxiliary tools and by CAD.

Teaching methods

Arranging the rules for standard-compliant drawing creation in a short lecture section, creating freehand sketches of machine components as well as CAD drawings (parts and assembly drawings) in the exercise section.

Mode of examination

Immanent

Additional information

Graduates of an HTL (mechanical engineering or similar orientation) can attend the shortened exercise section, see dates HTL groups. Graduates of an AHS (general high school) have exercise once a week throughout the semester, see dates for AHS groups.

The lecture part for the AHS groups will take place from Tuesday, October 8th, 2019 (10:30 - 12:00) in FH HS 1. The lecture is intended for students who have no previous knowledge (technical drawing and CAD). For graduates of a technical college (specializing in mechanical engineering or similar), a short summary of the lecture content is presented in the exercise section.

AHS groups 1, 2, 3, 6, 9, 12, 15 and 18 are only opened when the other AHS groups are full.

HTL groups 3, 6, 7 and 8 are only opened when the other HTL groups are full.

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Tue10:00 - 12:0008.10.2019 - 29.10.2019FH Hörsaal 1 - MWB lecture
Technical Drawing/CAD - Single appointments
DayDateTimeLocationDescription
Tue08.10.201910:00 - 12:00FH Hörsaal 1 - MWB lecture
Tue15.10.201910:00 - 12:00FH Hörsaal 1 - MWB lecture
Tue22.10.201910:00 - 12:00FH Hörsaal 1 - MWB lecture
Tue29.10.201910:00 - 12:00FH Hörsaal 1 - MWB lecture

Examination modalities

Ongoing assessment, assessment of finished drawings, short examination.

Group dates

GroupDayTimeDateLocationDescription
AHS 1Tue12:00 - 14:0029.10.2019 - 21.01.2020CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 1
AHS 2Tue12:00 - 14:0029.10.2019 - 21.01.2020Zeichensaal CAD 2 307.426 Technical Drawing/CAD AHS 2
AHS 3Tue12:00 - 14:0029.10.2019 - 21.01.2020CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 3
AHS 4Tue14:00 - 16:0029.10.2019 - 21.01.2020CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 4
AHS 5Tue14:00 - 16:0029.10.2019 - 21.01.2020Zeichensaal CAD 2 307.426 Technical Drawing/CAD AHS 5
AHS 6Tue14:00 - 16:0029.10.2019 - 21.01.2020CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 6
AHS 7Wed10:00 - 12:0030.10.2019 - 22.01.2020CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 7
AHS 8Wed10:00 - 12:0030.10.2019 - 22.01.2020Zeichensaal CAD 2 307.426 Technical Drawing/CAD AHS 8
AHS 9Wed10:00 - 12:0030.10.2019 - 22.01.2020CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 9
AHS 10Wed14:00 - 16:0030.10.2019 - 22.01.2020CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 10
AHS 11Wed14:00 - 16:0030.10.2019 - 22.01.2020Zeichensaal CAD 2 307.426 Technical Drawing/CAD AHS 11
AHS 12Wed14:00 - 16:0030.10.2019 - 22.01.2020CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 12
AHS 13Thu12:00 - 14:0031.10.2019 - 23.01.2020CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 13
AHS 14Thu12:00 - 14:0031.10.2019 - 23.01.2020Zeichensaal CAD 2 307.426 Technical Drawing/CAD AHS 14
AHS 15Thu12:00 - 14:0031.10.2019 - 23.01.2020CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 15
AHS 16Fri09:00 - 11:0025.10.2019 - 24.01.2020CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 16
AHS 16Thu14:00 - 16:0031.10.2019CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 16
AHS 17Fri09:00 - 11:0025.10.2019 - 24.01.2020Zeichensaal CAD 2 307.426 Technical Drawing/CAD AHS 17
AHS 17Thu14:00 - 16:0031.10.2019Zeichensaal CAD 2 307.426 Technical Drawing/CAD AHS 17
AHS 18Fri09:00 - 11:0025.10.2019 - 24.01.2020CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 18
AHS 18Thu14:00 - 16:0031.10.2019CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 18
HTL 1Fri13:00 - 15:0011.10.2019CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 1
HTL 1Fri13:00 - 15:0022.11.2019CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 1 Kolloquium
HTL 2Fri13:00 - 15:0011.10.2019Zeichensaal CAD 2 307.426 Technical Drawing/CAD HTL 2
HTL 2Fri13:00 - 15:0022.11.2019Zeichensaal CAD 2 307.426 Technical Drawing/CAD HTL 2 Kolloquium
HTL 3Fri13:00 - 15:0011.10.2019CAD-Labor Saal 3 307.426 Technical Drawing/CAD HTL 3
HTL 3Fri13:00 - 15:0022.11.2019CAD-Labor Saal 3 307.426 Technical Drawing/CAD HTL 3 Kolloquium
HTL 4Fri13:00 - 15:0018.10.2019CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 4
HTL 4Fri13:00 - 15:0029.11.2019CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 4 Kolloquium
HTL 5Fri13:00 - 15:0018.10.2019Zeichensaal CAD 2 307.426 Technical Drawing/CAD HTL 5
HTL 5Fri13:00 - 15:0029.11.2019Zeichensaal CAD 2 307.426 Technical Drawing/CAD HTL 5 Kolloquium
HTL 6Fri13:00 - 15:0018.10.2019CAD-Labor Saal 3 307.426 Technical Drawing/CAD HTL 6
HTL 6Fri13:00 - 15:0029.11.2019CAD-Labor Saal 3 307.426 Technical Drawing/CAD HTL 6 Kolloquium
HTL 7Fri13:00 - 15:0025.10.2019CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 7
HTL 7Fri13:00 - 15:0006.12.2019CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 7 Kolloquium
HTL 8Fri13:00 - 15:0025.10.2019Zeichensaal CAD 2 307.426 Technical Drawing/CAD HTL 8
HTL 8Fri13:00 - 15:0006.12.2019Zeichensaal CAD 2 307.426 Technical Drawing/CAD HTL 8 Kolloquium

Course registration

Begin End Deregistration end
24.06.2019 08:00 24.06.2019 08:01

Registration modalities:

The registration is being handled via the group registration of this lecture.

Group Registration

GroupRegistration FromTo
AHS 108.10.2019 13:0024.10.2019 23:59
AHS 208.10.2019 13:0024.10.2019 23:59
AHS 308.10.2019 13:0024.10.2019 23:59
AHS 408.10.2019 13:0024.10.2019 23:59
AHS 508.10.2019 13:0024.10.2019 23:59
AHS 608.10.2019 13:0024.10.2019 13:00
AHS 708.10.2019 13:0024.10.2019 23:59
AHS 808.10.2019 13:0024.10.2019 23:59
AHS 908.10.2019 13:0024.10.2019 23:59
AHS 1008.10.2019 13:0024.10.2019 23:59
AHS 1108.10.2019 13:0024.10.2019 23:59
AHS 1208.10.2019 13:0024.10.2019 23:59
AHS 1308.10.2019 13:0024.10.2019 23:59
AHS 1408.10.2019 13:0024.10.2019 23:59
AHS 1508.10.2019 13:0024.10.2019 23:59
AHS 1608.10.2019 13:0024.10.2019 23:59
AHS 1708.10.2019 13:0024.10.2019 23:59
AHS 1808.10.2019 13:0024.10.2019 23:59
HTL 120.09.2019 12:3011.10.2019 12:00
HTL 220.09.2019 12:3011.10.2019 12:00
HTL 320.09.2019 12:3011.10.2019 12:00
HTL 420.09.2019 12:3011.10.2019 12:00
HTL 520.09.2019 12:3011.10.2019 12:00
HTL 620.09.2019 12:3011.10.2019 12:00
HTL 720.09.2019 12:3011.10.2019 12:00
HTL 820.09.2019 12:3011.10.2019 12:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 1. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
033 282 Mechanical Engineering - Management 1. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")

Literature

Lecture notes are available for the price of EUR 12,- in the front of HS FH 1 during the first lecture.

Afterwards the lecture notes are available Tuesday to Thursday 9 am to 12 am at the secretary’s office of the institute E 307, 4th floor, Maschinenbaugebäude Hoftrakt BD, Getreidemarkt 9.

Frischherz, Piegler, Semrad: "Technisches Zeichnen, Fachzeichnen", Verlag Jugend & Volk.

Miscellaneous

  • Attendance Required!

Language

German