302.022 Modelling and Simulation of Thermodynamic Processes
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022S, VO, 2.0h, 3.0EC
TUWEL

Properties

  • Semester hours: 2.0
  • Credits: 3.0
  • Type: VO Lecture
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to...

  • recognize and abstract of the physical processes essential for thermal engineering processes.
  • mathematically describe and solve of thermal engineering processes.
  • apply the three methods (simulation, analysis and optimization) presented in the lecture.

Subject of course

Thermal engineering processes are often very extensive so that they can not be described in a mathematical way. The aim of the lecture is that the students are able to solve and to extract various problems of thermotechnical processes and their physical behaviour. Also a part of the lecture is to describe methods to solve mathematical relations.

Teaching methods

The aim of the course is to teach methods for abstraction of the physical processes essential for thermal processes into mathematical relationships and their solution. Three essential methods such as simulation (0,1,2,3D and bond graphs), analysis (pinch analysis) and optimization (operation planning) are presented.

Mode of examination

Written and oral

Additional information

This course will be held in "hybrid" format during the summer semester 2022. The majority of lectures will be held on-site. You will find the corresponding venue under "Dates". Two lectures will be held online via Zoom. These are the lectures on 31.03.2022 and 07.04.2022. Further information, as well as the Zoom access links for these dates, can be found in the corresponding TUWEL course.

We would also like to point out that the current rules of conduct at the TU Vienna must be taken into account when participating this course: https://www.tuwien.at/tu-wien/corona

Information on the current examination modalities can be found in the corresponding section.


Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Thu10:00 - 12:0010.03.2022 - 23.06.2022Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu10:00 - 12:0030.06.2022Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Modelling and Simulation of Thermodynamic Processes - Single appointments
DayDateTimeLocationDescription
Thu10.03.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu17.03.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu24.03.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu31.03.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu07.04.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu28.04.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu05.05.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu12.05.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu19.05.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu02.06.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu09.06.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu23.06.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse
Thu30.06.202210:00 - 12:00Seminarraum BA 05 - MB 302.022 Modellierung und Simulation wärmetechnischer Prozesse

Examination modalities

The proof of performance of the LVA takes the form of a written examination and an interview.

Note for the summer term 2022:

Due to the current situation, all written examinations until (at least) September 30th 2022 will be held as written online examination via Zoom. Examiners and candidates are permanently connected via audio and video via Zoom. At the beginning of the exam, the exam tasks are made available digitally via TUWEL. The exams are processed on paper exclusively with the help of the aids specified in the exam announcement during the lecture. Candidates must scan or photograph the described sheets (in full) within 5 minutes after the examination and uploaded them to TUWEL. Helpful and free scanner apps are Adobe Scan or Office Lens. Candidates should familiarize themselves with these apps and this process and test them in advance.

Oral examinations will be held on-site at institute E302.

Gladly, we would like to offer the candidates a test run of the online examination mode or clarify the remaining questions via email.
Further information on the online exam format can be found in TUcoLab (https://colab.tuwien.ac.at/pages/viewpage.action?pageId=11638408), in particular under point 2.3 "Written online exam on paper".

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri10:00 - 12:0007.10.2022Seminarraum BA 05 - MB written&oral17.08.2022 00:00 - 30.09.2022 00:00TISSPrüfung 302.022
Fri10:00 - 12:0016.12.2022 written&oral02.11.2022 23:00 - 09.12.2022 00:00TISSPrüfung 302.022
Fri10:00 - 12:0020.01.2023 written&oral19.12.2022 00:00 - 13.01.2023 00:00TISSPrüfung 302.022
Fri10:00 - 12:0010.03.2023Seminarraum BA 08B - MB written&oral01.11.2022 08:00 - 03.03.2023 17:00TISSPrüfung 302.022
Fri10:00 - 12:0021.04.2023Seminarraum BA 08B - MB written&oral28.02.2023 00:00 - 14.04.2023 00:00TISSPrüfung 302.022
Fri10:00 - 12:0030.06.2023Seminarraum BA 08B - MB written&oral28.02.2023 00:00 - 23.06.2023 00:00TISSPrüfung 302.022

Course registration

Use Group Registration to register.

Group Registration

GroupRegistration FromTo
Gruppe29.01.2022 08:0007.07.2022 08:00

Curricula

Study CodeSemesterPrecon.Info
066 445 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
066 473 Chemical and Process Engineering
066 482 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase
700 Mechanical Engineering
730 Chemical and Process Engineering

Literature

No lecture notes are available.

Accompanying courses

Language

German