212.022 Concrete Structures - Practical Applications
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022W, UE, 3.0h, 3.0EC
TUWEL

Course evaluation

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: UE Exercise
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to explain and apply current standards for the design and calculation of concrete constructions. By designing a actual structure for the Tutorial project, the students are able to dimension a concrete construction project relevant to practice. They can also create a full static report and formwork and reinforcement plans.

Subject of course

A reinforced concrete structure will be designed and calculated according to the valid standards. Following structures have been designed in the past: Diving tower, observation tower, tower for wind turbines with H>60m, frame for a sportstand roofing, frame for an industrial hall, shed roof, avalanche barrier, tennis hall, prestressed concrete bridge, etc.)

Teaching methods

Deepening the knowledge that has been learned in the accompanying lectures by solving calculation examples. A practice-oriented design construction project is worked on independently with supervision.

Mode of examination

Immanent

Additional information

The tutorial is only offered (since 2014/2015) during the winter semester.

The schedule and explanation of the lecture (212.021) and the tutorial (212.022) can be found under UNTERLAGEN at the beginning of the semester.


Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Mon08:00 - 10:0003.10.2022 - 23.01.2023Hörsaal AE U1 - 1 Übungs-Vorträge
Mon09:00 - 11:0028.11.2022 Hörsaal AE U1 - 1 - BI1. Test (Kolloquium) (Paralleltermin)
Mon09:00 - 11:0009.01.2023 Hörsaal AE U1 - 1 - BI2. Test (Kolloquium) (Paralleltermin)
Mon09:00 - 12:0023.01.2023 Hörsaal AE U1 - 1 - BI3. Test (Kolloquium) (Paralleltermin)
Concrete Structures - Practical Applications - Single appointments
DayDateTimeLocationDescription
Mon03.10.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon10.10.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon17.10.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon24.10.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon31.10.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon07.11.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon14.11.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon21.11.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon28.11.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon28.11.202209:00 - 11:00 Hörsaal AE U1 - 1 - BI1. Test (Kolloquium) (Paralleltermin)
Mon05.12.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon12.12.202208:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon09.01.202308:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon09.01.202309:00 - 11:00 Hörsaal AE U1 - 1 - BI2. Test (Kolloquium) (Paralleltermin)
Mon16.01.202308:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon23.01.202308:00 - 10:00Hörsaal AE U1 - 1 Übungs-Vorträge
Mon23.01.202309:00 - 12:00 Hörsaal AE U1 - 1 - BI3. Test (Kolloquium) (Paralleltermin)

Examination modalities

The exercise consists of tests and an assignment. Both parts must be passed in order to receive a passing grade on the exercise.

Tests

Three tests are offered, two of which must be taken - the third is considered an alternate date. A maximum of 25 points can be achieved per test. A minimum of 25 points is required to pass the tests. The two best out of three possible test results are included in the grade. Thus, a total of 50 points can be achieved in the tests. The time available to complete the tests is 105 minutes each.

In order to participate in the exercise and thus in the tests, a TISS registration in the group "Registration for the 1st and 2nd exercise test" is required by 12.10.2022 (12:00) at the latest. To participate in the third test, a TISS registration in the group "Registration for the 3rd practice test" is required from 11.01.2023 (12:00) to 20.01.2023 (13:00). Those who are not registered for the third test will not be able to participate.

Examination-relevant material areas for the tests:

1st test: all lectures presented up to that point.

2nd test: all lectures presented up to that point, except those already tested in the 1st test

3rd test: the entire subject area

The following materials are allowed for the tests:

Calculator (also programmable permitted), lecture script (2013 version or more recent - older versions are not permitted), ÖNORM EN 1992-1-1 and ÖNORM B 1992-1-1 in the current version (coefficients may be transferred from the national annex to the basic document. Markings are allowed).

The following aids are NOT allowed for the tests:

Exercise script, calculated test examples, "recipes", self-written formulas, construction tables or similar works.

Assignment

The construction exercise will be handed out at the beginning of the semester (see schedule). The assignment consists of a structural analysis (maximum 17.5 points), preparation of plans (maximum 30 points), and a final peer-review-process (maximum 2.5 points) in which feedback must be prepared for randomly assigned anonymized plan documents. Both the structural analysis and the plan documents must be passed. A total of 50 points can thus be achieved in the assignment.

The assignment must be submitted no later than Thursday, 23.03.2022 at 15:00. The structural analysis of the assignment must be submitted via TUWEL. Hard copies of the plans must be submitted in person or by mail to the Institute as well as via TUWEL (for peer review). The results table must also be completed and uploaded to TUWEL as it serves as the basis for the peer review process. A design exercise handed in late will not be accepted!

The preparation of the feedback in the course of the peer-review-process is scheduled for the period between 28.03.2022 - 01.04.2023 via TUWEL. However, the peer-review-process can be completed at an earlier time after the assignment has been submitted in full and the respective supervisor has been consulted.

The total number of points (max. 100) for the final grade is composed of the points achieved in the tests (max. 50) and the points achieved in the assignment (max. 50).

A summary of the dates of the lectures and the tests will be added at the start of the semester or can be found under Documents.

Group dates

GroupDayTimeDateLocationDescription
Anmeldung für den 1. und 2. ÜbungstestMon09:00 - 11:0028.11.2022Hörsaal AE U1 - 1 1. Übungstest
Anmeldung für den 1. und 2. ÜbungstestMon09:00 - 11:0028.11.2022HS 7 Schütte-Lihotzky - ARCH 212.022 Concrete Structures - Practical Applications Anmeldung für den 1. und 2. Übungstest
Anmeldung für den 1. und 2. ÜbungstestMon09:00 - 11:0009.01.2023Hörsaal AE U1 - 1 2. Übungstest
Anmeldung für den 1. und 2. ÜbungstestMon09:00 - 11:0009.01.2023HS 7 Schütte-Lihotzky - ARCH 212.022 Concrete Structures - Practical Applications Anmeldung für den 1. und 2. Übungstest
Anmeldung für den 1. und 2. ÜbungstestMon09:00 - 11:0009.01.2023EI 8 Pötzl HS - QUER 212.022 Concrete Structures - Practical Applications Anmeldung für den 1. und 2. Übungstest
Anmeldung für den 3. ÜbungstestMon09:00 - 11:0023.01.2023Hörsaal AE U1 - 1 3. Übungstest
Anmeldung für den 3. ÜbungstestMon09:00 - 11:0023.01.2023HS 7 Schütte-Lihotzky - ARCH 212.022 Concrete Structures - Practical Applications Anmeldung für den 3. Übungstest

Course registration

Use Group Registration to register.

Group Registration

GroupRegistration FromTo
Anmeldung für den 1. und 2. Übungstest22.09.2022 08:0012.10.2022 12:00
Anmeldung für den 3. Übungstest10.01.2023 12:0019.01.2023 16:00
TUWEL LIVESTREAM28.09.2022 08:0006.02.2023 18:00

Curricula

Study CodeSemesterPrecon.Info
033 265 Civil Engineering 5. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

Es wird ein Übungsskriptum mit durchgerechneten Beispielen ab Semesterbeginn auf TUWEL angeboten.

Previous knowledge

Curriculum E 033 265:

Technical and methodical skills: Knowledge of the contents of the Modules with the general and subject-specific foundations
Cognitive and practical skills: Ability to determine structural systems (Modul Baustatik – Structural Engineering), spatial imagination Social skills and self-competence: Interest in technical issues

Mandatory requirements: The courses of this Module require the successful completion of the StEOP

 

Accompanying courses

Language

German